Buster_gt wrote: » anybody know if sedan window guts will fit in a wagon door? i.e. regulator and crank
pyroskater6912 wrote: » will the center dash vent part (with the clock) fit from other cars or were they wagon specific? sorry if thats been answered here
bluecruiser wrote: » i believe not. i tried it fitting one from a 4door but its more angled bit more than the wagons.
91 wagon here need trunk latch, can i grab from hatch or sedan 91? Thanks.
@unc25 windshield is not interchangeable.
@Melma30 are you looking for the striker (bottom) or the latch (top)
Bottom wagon: 74813-SH5-003
Bottom hatch: 83305-SD2-003
Sedan: 74862-SE3-003
Top wagon: 74800-SH5-013
Hatch: 74800-SH3-013
Sedan: 74850-SM4-003
So the tops -might- work based on part numbers, but it's hard to tell from the IPB drawings. The bottoms are all different.
Comments
YES they just wont roll down all the way.. maybe 1/2" or less of window
They are close. You'd have to swap the part of the regulator that holds the window at the bottom (the beam with 2 bolt holes).
Is there a definitive answer on SIDE vents for the hatch and wagon interchangeability?
My passenger side vent just broke and CRX vents are easy to come by.
91 wagon here need trunk latch, can i grab from hatch or sedan 91? Thanks.
@unc25 windshield is not interchangeable.
@Melma30 are you looking for the striker (bottom) or the latch (top)
Bottom wagon: 74813-SH5-003
Bottom hatch: 83305-SD2-003
Sedan: 74862-SE3-003
Top wagon: 74800-SH5-013
Hatch: 74800-SH3-013
Sedan: 74850-SM4-003
So the tops -might- work based on part numbers, but it's hard to tell from the IPB drawings. The bottoms are all different.