Got a new drivers side tail light and a rocker cover from RTI Intrac the other day:
Rocker Cover as it sits now, paint stripped and shaved:
Also got my shocks back from getting machined:
Top groove is the original, middle one should be a 20mm drop, bottom one should be a 35mm drop.
And some pics:
3 Wheeling:
Also had the track day with the integra, it was raining and I ended up going backwards and sideways at 120kp/h off into the grass/mud which was quite amusing
Once in the dry I had awesome fun, managed to get to 185kp/h on the back straight and could go out for 7laps at a time before oil temp got to 120degrees + and I had to back off
Yea 4 door is much better to have, its used to be my daily.
Its a replica of a Mugen Gen1 Wing, I wanted a genuine one and would have bought one, except that they were never made for a 4door and wouldnt fit.
So I got this one made, its carbon fibre as well but Im looking at getting it painted.
Also considering some Work SE37k Special Edition Blue wheels for it
What do you guys reckon about removing the roof rails to make it looks lower?
How would I go about doing this and not leaving holes in my roof?
you could sell it. lots of guys want them.
i took mine off and had the holes welded shut.
i was worried about the roof warping from the welds, but it hasn't happend yet.
Did those indicators come with the bumper and what did you pay for it, if you dont mind me asking
It sure is
I got the bumper with indicators and bumper support + delivery for $250 from strongs, just mention your on NZH and you get a discount (even if your not)
nice wagon. you should try the lime green on the rims. i think that the matching rim to body only looks good in neutral colored cars. thats just me though.
foor door itr gorgeous. itr ctr owners i hate you. j/p
Comments
Hope to get them back tomorrow and install them this weekend. I also have to prep the Integra for a trackday on Tuesday
But I have been working on the integra, installed radiator:
Trimmed Fan to make it fit, and binned the other fan
Also am part way through installed Oil temp and Oil Pressure gauges and shift light
How it sits now
Rocker Cover as it sits now, paint stripped and shaved:
Also got my shocks back from getting machined:
Top groove is the original, middle one should be a 20mm drop, bottom one should be a 35mm drop.
And some pics:
3 Wheeling:
Also had the track day with the integra, it was raining and I ended up going backwards and sideways at 120kp/h off into the grass/mud which was quite amusing
Once in the dry I had awesome fun, managed to get to 185kp/h on the back straight and could go out for 7laps at a time before oil temp got to 120degrees + and I had to back off
Rear springs are *just* captive, front spring perch is almost sitting on the brake line bracket
How would I go about doing this and not leaving holes in my roof?
you got a RHD wagovan and a 4 door ITR.
sooo sick.
So you can put them on your push bike? Or is there something your not telling us?
Haha, seems kinda normal around here (except for the fact I have never seen a modified shuttle in person, or a 98spec 4door)
is that a mugen wing i see on the itr as well?
Its a replica of a Mugen Gen1 Wing, I wanted a genuine one and would have bought one, except that they were never made for a 4door and wouldnt fit.
So I got this one made, its carbon fibre as well but Im looking at getting it painted.
Also considering some Work SE37k Special Edition Blue wheels for it
Looks a bit plain, but heaps better than it was
Ive tried to match it to the body colour, thats as close as I could get.
Thoughts?
you could sell it. lots of guys want them.
i took mine off and had the holes welded shut.
i was worried about the roof warping from the welds, but it hasn't happend yet.
SO from kinda low to as low as I can with captive springs cost about $5 8)
Cheers for the info, ive kinda gone off that train of thought as I might be needed roof racks to carry stuff around.
On another note I have just ordered a JDM EF9 (facelift) front bumper and lip, also a "personal" box that replaces the ash tray as I dont smoke.
Should get onto that in a week or so, gunna try paint the bumper myself as its grey at the moment, will see how that goes
I decided my rocker cover looked a bit plain, so chucked on this sticker:
spoiler is nice too how you had it made.
Some goodies showed up yesterday:
Have started prepping the bumper for paint, will do more tomorrow as its raining and I have class tonight
Did those indicators come with the bumper and what did you pay for it, if you dont mind me asking
It sure is
I got the bumper with indicators and bumper support + delivery for $250 from strongs, just mention your on NZH and you get a discount (even if your not)
Thanks
Luckily I dont have any kids to put in mine (and hopefully not for a few years yet) but certainly good a lot more useful than a 2door
New rear lip, just test fitted before paint
And finished:
Nope DA front lip modified to fit with my heatgun, cordless drill and jigsaw
Came out pretty decent I think
foor door itr gorgeous. itr ctr owners i hate you. j/p
And for a laugh:
http://www.youtube.com/watch?v=0CzSxZcr ... annel_page