so ive been working hard at getting all three of my cars up and running the past few weeks, bt with the coming of spring and allergies like no other, photoshoots in telluride, and all that other shit, ive been slowlyyy getting things done.
Installed the ITR booster and MC i got from some awesome dude on hTech and realized the MC brace wouldnt work, so naturally it installed in my CRX:)
Reinstalled the Skunk2 IM and Hondata gasket (after i thoroughly cleaned all sensors, OEM new injector dohnuts and Orings, TB, etc) and AEM rail and reg
refitted the battery tray to house the odyssey slim and clear the whale penis!
Repainted the Full Race traction bar and got brand new hardware, installed
did a mild wire tuck as there were so many plugs not connected to anything and being unused. some wires werent soldered and had them soldered/shrinkwrapped
installed WYRANN rear diff bushings and new rear subframe bolts
.....now i just have to trickle the battery overnight, install the alternator belt, and bleed the brakes. off to the bodyshop next week:)
and on my other wagon: need to do the wheel bearings this weekend. sighhhh. but did make some progress on it. Installed an armrest and DA seats/undertrays, and a carbon bezel for my replica Spoon cluster. haha.
pics of the bseries sometime this week, when i feel brave enough to defeat the pollen:(
in other news, im having to go to the wreckers this coming week to cut off rear wheel fenders/quarters so my bodyman can get them welded in. he's currently working on getting the EF9 hood to work with the rest of the EF9 front conversion. it's looking quite promising. top of the hood needs trimming, sides need a slight grind, and front is fine!!
im in a bit of a pinch as ill be leaving for work to europe for 2 months starting June 13th and trying to finish this thing off before i take off. i had rear EDM interior and a set of DC5 blue fronts in the works, but both deals have gone astray. so time will tell. im not really in a hurry to finish. just HAS to be done by winter:) i wanna take my time and do it right
as far as other parts that i have yet to install:
rywire complete OBD1 tuck harness (the OEM harness just needed to be replaced)
BNIB OEM Honda Dizzy
NGK blue wiresss an plugs
shaved down to single belt GSR crank pulley retaining harm. dampener
all new sensors. ALL NEW SENSORS. figured why not. no idea on age....
finished installing the OEM Subary legacy rack. Chopped 2" off each lengthwise, and 1" off the crossbars, and it fits the roof PERFECTLY!
i can never really remember stuff ive done. im horrible at keeping up with my own build. shitt.
ill update with pics when i can. preferably after i install the harness, clean up the bay and have all the body panels on for a "test fit"
Comments
Installed the ITR booster and MC i got from some awesome dude on hTech and realized the MC brace wouldnt work, so naturally it installed in my CRX:)
Reinstalled the Skunk2 IM and Hondata gasket (after i thoroughly cleaned all sensors, OEM new injector dohnuts and Orings, TB, etc) and AEM rail and reg
refitted the battery tray to house the odyssey slim and clear the whale penis!
Repainted the Full Race traction bar and got brand new hardware, installed
did a mild wire tuck as there were so many plugs not connected to anything and being unused. some wires werent soldered and had them soldered/shrinkwrapped
installed WYRANN rear diff bushings and new rear subframe bolts
.....now i just have to trickle the battery overnight, install the alternator belt, and bleed the brakes. off to the bodyshop next week:)
and on my other wagon: need to do the wheel bearings this weekend. sighhhh. but did make some progress on it. Installed an armrest and DA seats/undertrays, and a carbon bezel for my replica Spoon cluster. haha.
pics of the bseries sometime this week, when i feel brave enough to defeat the pollen:(
ok.
in other news, im having to go to the wreckers this coming week to cut off rear wheel fenders/quarters so my bodyman can get them welded in. he's currently working on getting the EF9 hood to work with the rest of the EF9 front conversion. it's looking quite promising. top of the hood needs trimming, sides need a slight grind, and front is fine!!
im in a bit of a pinch as ill be leaving for work to europe for 2 months starting June 13th and trying to finish this thing off before i take off. i had rear EDM interior and a set of DC5 blue fronts in the works, but both deals have gone astray. so time will tell. im not really in a hurry to finish. just HAS to be done by winter:) i wanna take my time and do it right
as far as other parts that i have yet to install:
rywire complete OBD1 tuck harness (the OEM harness just needed to be replaced)
BNIB OEM Honda Dizzy
NGK blue wiresss an plugs
shaved down to single belt GSR crank pulley retaining harm. dampener
all new sensors. ALL NEW SENSORS. figured why not. no idea on age....
finished installing the OEM Subary legacy rack. Chopped 2" off each lengthwise, and 1" off the crossbars, and it fits the roof PERFECTLY!
i can never really remember stuff ive done. im horrible at keeping up with my own build. shitt.
ill update with pics when i can. preferably after i install the harness, clean up the bay and have all the body panels on for a "test fit"
Wow.