Engine Won't Start and I Need Some Help Checking the Igniter.

outcast

So my 91 awd died a few days ago after running for a few seconds, and now won't start again. Starter cranks and I hear the fuel pump spin, but I don't seem to be getting a spark. In going through the procedures in the manual for testing the igniter, and everything seems fine until I test for the continuity between the BLU wire and the ground. I've checked the three grounds the manual mentions and they all seem fine, so now I'm trying to trace the BLU wire to the tach, but I don't know where it goes once it enters the wiring loom. Can anyone give me an idea of the path it follows through the engine bay and which connectors I might be able to separate so I can look for breaks?

Thanks for any help.

greenteagod

Are you getting spark? You said don't seem to, but it's easy enough to pull a plug and check. You can search around here and I believe there is a post that links service manuals to find the wiring diagrams. I'll give a read through mine when I get home, but I'd definitely pull a plug and confirm spark before anything else.

SiWagon

Maybe this link will help:[h=2]+++ SiWagon Freebie:Honda Ignition Upgrade:D
http://www.civicwagon.com/showthread.php?74-SiWagon-Freebie-Honda-Ignition-Upgrade-D[/h]