Installed new: Plugs, cap rotor, wires, o2 sensor and fuel filter today, runs like a champ now!
Oh, and got in my BLOX rear LCA's and installed my new hatch struts! hatch lifts with ease!
Got home today and found this on my door step!
Sand those babies up with some 600 grit wet sand paper so the paint sticks...
Apply first coat...Looks yellow now, but it will darken over time....Might look good to keep yellow if you have yellow brights?
Third coat, just right...
After baking them in the oven at 200 degrees for 15 minutes, I noticed a little orange peel...
So I wet sanded with this...
Result...
Then used the trusty orbital...
With Some of this...
Looks a little better...(Don't mind the crack)
Annnnnd without further a due.....BAM
Side views
And a full frontal, oh I also sprayed the bumper lights!
And a teaser for tomorrow or this weekend, what do I need these for?...
I am by Vancouver mall all the time, if you want to check out my car, I work at America's Tire Company right there by the auto mall. Will be there tomorrow all day in fact.
Comments
Oh, and got in my BLOX rear LCA's and installed my new hatch struts! hatch lifts with ease!
Sand those babies up with some 600 grit wet sand paper so the paint sticks...
Apply first coat...Looks yellow now, but it will darken over time....Might look good to keep yellow if you have yellow brights?
Third coat, just right...
After baking them in the oven at 200 degrees for 15 minutes, I noticed a little orange peel...
So I wet sanded with this...
Result...
Then used the trusty orbital...
With Some of this...
Looks a little better...(Don't mind the crack)
Annnnnd without further a due.....BAM
Side views
And a full frontal, oh I also sprayed the bumper lights!
And a teaser for tomorrow or this weekend, what do I need these for?...
Oh, and switched this thread to "Member's Rides" So followers click here.
Link: :arrow: http://www.hondacivicwagon.com/bb/viewtopic.php?f=5&t=9437