I went to the junkyard this morning and hoping that the rear passenger door side molding on the wagon that I saw 2 weeks ago is still there.. it's bent just like the one I have right now but the one for the driver side door was still there and it was straight. I picked both of them and found a solution to my problem.
on ur left is the driver side molding(straight) on ur right is the rear passenger door molding (bent). I cut the the ends with dremel.
after cutting the straight one.. I inserted the ends from the bent ones..
test fit...
applied 3M weatherstrip adhesive between the gap.. will sand it down when it dries.
next thing to do is paint the front and rear bumper and the moldings!
hahaha true i cant stand my lagging driver window it pisses me off.... plus wen it rained recently the speaker went out
u plan to paint ur bumoer?
the clutch wer in east sd did u live at? y did u leave the weathers amazing here
4-24-11. put some seafoam in the gas tank, polished the whole car with meguiars ultimate compound and did some photoshoot inside my garage with my other rides.....
Comments
Went to the junk yard and found this volvo lip for $23.
cut the excess lip with dremel
installed the foglights that I bought from kragen
and here u go..
thanks!
on ur left is the driver side molding(straight) on ur right is the rear passenger door molding (bent). I cut the the ends with dremel.
after cutting the straight one.. I inserted the ends from the bent ones..
test fit...
applied 3M weatherstrip adhesive between the gap.. will sand it down when it dries.
next thing to do is paint the front and rear bumper and the moldings!
there's really nothing left on the donor wagon that u might need.. and I just did a quick run coz I cant stand my f'd up molding anymore...
u plan to paint ur bumoer?
the clutch wer in east sd did u live at? y did u leave the weathers amazing here
thank u sir!
thanks! where u in cali?
which volvo?