Bull bar specs ?

EE4civowagEE4civowag New Wagonist
in General Civic Wagon Discussion
I work in a fab shop and was just curious if any one would mind pulling a tape and giving me some specs so I can build my own bull bar. It would be much appreciated. And if this is already on here please point me in the right direction cause I could not find anything.

Comments

  • dirtydirtydirtydirty Wagonist
    if your looking for the OEM specs good luck lol
    otherwise do like i did and design your own
    viewtopic.php?f=17&t=11326
    pretty sure mine was about 38"w 10.5" deep and 10-12" tall
  • CharbCharb Administrator
    dirtydirty wrote:
    if your looking for the OEM specs good luck lol

    word
  • EE4civowagEE4civowag New Wagonist
    Thank you dirtydirty your bull bar is sick. I'm going to design my own I want it to look close to stock. Give me a week or too and I will have pics posted of it. We are kinda busy at my shop so it will take me a little while. What do stock ones go for? I bet they are hard to come by.
  • dirtydirtydirtydirty Wagonist
    do some research on here and you will find your answer
    most of the time if it has the mounting bracket 3x you can expect to pay ~$250 + shipping
  • CharbCharb Administrator
    dirtydirty wrote:
    do some research on here and you will find your answer
    most of the time if it has the mounting bracket 3x you can expect to pay ~$250 + shipping


    Supply and demand though. Currently the demand is super high. I think I'll sell mine for $600 :lol:

    Definitely just kidding
  • 91civicZC91civicZC Wagonist
    Search "Beagle Bar Dimensions". as the post topic. I asked this ages Ago. After an interesting tiff between Ragen and myself, Ragen was kind enough to post the mesurments on his for me. Its in the thread.
  • ragenasianragenasian Moderator
    The top is 55 cm wide
    The middle where the lights sit is 66
    the lower is 77
    From the middel bar to the top is 25
    and the total from top to bottom is about 60

    Here they are for those that fail to search.
  • EE4civowagEE4civowag New Wagonist
    I apologize for not being patient in my search. This is much appreciated and very helpfull. I cany wait to get this done. I lifted my wag back up and got scion 15" steelies with michelin ice-x 205-65-15 probably the biggest tire you can fit on a civic. I think it will look mean with a bull bar rally style. I just can't wait for it to snow so I can go have som fun.
  • 503Wagon503Wagon moderator
    I am planning on Fabbing up my own style bar as well. Just havnt decided what rout I want to take yet. Keep us updated.
  • vtecn8ivevtecn8ive Senior Wagonist
    Charb1618 wrote:
    dirtydirty wrote:
    do some research on here and you will find your answer
    most of the time if it has the mounting bracket 3x you can expect to pay ~$250 + shipping


    Supply and demand though. Currently the demand is super high. I think I'll sell mine for $600 :lol:

    Definitely just kidding


    Annoyingly high.
  • CharbCharb Administrator
    vtecn8ive wrote:
    Charb1618 wrote:
    dirtydirty wrote:
    do some research on here and you will find your answer
    most of the time if it has the mounting bracket 3x you can expect to pay ~$250 + shipping


    Supply and demand though. Currently the demand is super high. I think I'll sell mine for $600 :lol:

    Definitely just kidding


    Annoyingly high.


    You missed the part where I said I was kidding?

    I swear, the only time I didn't have people bugging me about selling mine, was when you had one for sale.

    I'll probably never sell mine. Too much of a story. Spent years lusting like most people. It went from Japan, to Germany, to humble Spokane, WA. If someone would have bought my car when it was for sale, I may have let it go with her. But I'm glad nothing ever happened.
  • 503Wagon503Wagon moderator
    So Uh....charb...$450 picked up? :-p
  • jonyboy08jonyboy08 Band Wagon
    anyone selling a bull bar?
  • CharbCharb Administrator
    jonyboy08 wrote:
    anyone selling a bull bar?

    $600
  • EE4civowagEE4civowag New Wagonist
    I have not started mine yet give me a week or two. I will post pics. Been super busy with christmas and birthdays and weddings and stuff. Please stay posted.
  • jonyboy08jonyboy08 Band Wagon
    Charb1618 wrote:
    jonyboy08 wrote:
    anyone selling a bull bar?

    $600

    damn 600. not im my budget. thanks though.
  • vtecn8ivevtecn8ive Senior Wagonist
    I was referring to how so many people have contacted me too. Lol.
    Charb1618 wrote:
    vtecn8ive wrote:
    Charb1618 wrote:
    dirtydirty wrote:
    do some research on here and you will find your answer
    most of the time if it has the mounting bracket 3x you can expect to pay ~$250 + shipping


    Supply and demand though. Currently the demand is super high. I think I'll sell mine for $600 :lol:

    Definitely just kidding


    Annoyingly high.


    You missed the part where I said I was kidding?

    I swear, the only time I didn't have people bugging me about selling mine, was when you had one for sale.

    I'll probably never sell mine. Too much of a story. Spent years lusting like most people. It went from Japan, to Germany, to humble Spokane, WA. If someone would have bought my car when it was for sale, I may have let it go with her. But I'm glad nothing ever happened.
  • HashelHashel Band Wagon
    How hard would it be to just make your own bull bar? shouldnt be very hard what other vehicles bull bars will fit?
  • 503Wagon503Wagon moderator
    Hashel wrote:
    How hard would it be to just make your own bull bar? shouldnt be very hard what other vehicles bull bars will fit?

    Let me direct you...

    viewtopic.php?f=9&t=11556
  • HashelHashel Band Wagon
    cool thx :D
Sign In or Register to comment.

© Vanilla Keystone Theme 2025