How is your Aftermarket Exhaust routed?

sumodesignssumodesigns New Wagonist
in Engine & Drivetrain
Wassup Guys!

I am currently in the process of modding my 89 2wd wagon and wanted to get an idea how people are routing their aftermarket muffler. I want to use a highflow stright muffler, and want to place it in the same place where the stock 1 exits.

If you have pics or diagrams please post.

Thanks!

Comments

  • jhotajhota familEE
    straight out the back.

    www.civicwagon.com
  • SiWagonSiWagon Council Member
    Look through the different postings.



    http://www.hondacivicwagon.com/board/vi ... 4&start=15
  • mrwagovanmrwagovan familEE


    jhota, i love it man.
    you rockin' it baby.

    www.civicwagon.com
  • KahunaKahuna familEE
    41.jpg

    IM000932.jpg

    www.civicwagon.com

    Just like that, it works fine, looks great.

    I would highly reccomend a Magnaflow 5x8 Oval Street series, if you are still looking for a muffler. It's awesome!
  • sumodesignssumodesigns New Wagonist
    Thanks for the input guys! I will hopefully get my exhaust put on next weekend if they ever finish the ZC swap.
  • jhotajhota familEE
    yeah, i have to say that i wouldn't really recommend an exhaust like mine. no real clearance issues and it looks cool, but it is loud as fawk!
  • mrwagovanmrwagovan familEE
    jhota wrote:
    yeah, i have to say that i wouldn't really recommend an exhaust like mine. no real clearance issues and it looks cool, but it is loud as fawk!





    i haven't heard a sound clip from yours but..i saw this and it immediately reminded me of your bangin' set up.


    http://video.google.com/videoplay?docid ... 3730&hl=en
    http://www.youtube.com/watch?v=fDRdEH990Dk

    wMTI5NTE3OTZzNDEzZGZkMzF5NTQx.jpg

    wMTI5NTE3NjZzNDEzZGZkMzF5NTQx.jpg

    wMTI5NTE3NzZzNDEzZGZkMzF5NTQx.jpg

    wMTI5NTE3ODZzNDEzZGZkMzF5NTQx.jpg

    M7 Exhaust spec: T-304 Stainless steel mandrel bent tube, 2.25", polished 3.5" tip, dual resonator, weighs ~26lbs, slip-fit joints (no welding needed), fits '03+ MCS
  • jhotajhota familEE
    that's a nice sounding exhaust. though it's hard to tell from the videos, i think mine's louder. :twisted:

    if i can beg/borrow/steal a digital video camera or audio recording device, i'll post it up.

    edit: one of the reasons i think mine is louder is that people who ride in my car tend to bring earplugs. at least after the first time.
  • mrwagovanmrwagovan familEE
    jhota wrote:
    edit: one of the reasons i think mine is louder is that people who ride in my car tend to bring earplugs. at least after the first time.




    too much and the po po will write you up a nice ticket.
  • jhotajhota familEE
    mrwagovan wrote:
    jhota wrote:
    edit: one of the reasons i think mine is louder is that people who ride in my car tend to bring earplugs. at least after the first time.




    too much and the po po will write you up a nice ticket.

    hey, you know what N.W.A. said, right?
  • sumodesignssumodesigns New Wagonist
    I decided to stager and angle my $30 ebay exhaust.

    78.jpg
  • akiraboyakiraboy HondaCivicWagon.com Founder
    not bad
  • mrwagovanmrwagovan familEE
    jhota wrote:
    hey, you know what N.W.A. said, right?



    err..hmmm..let's see now..
    I LOVE THE POLICE??     :wink:
  • wagodizzlewagodizzle Council Member and EDM expert
    straight out the back then into a bendy muffler.. sorta OEM i guess

    -2.25 inch piping.
    -shitty turbo box (yuck)

    its all "temporary" till i get a Thermal R&D muffler. then imma route it down next to/under the LCA.

    to go this route you have to be really careful, otherwise it will VIBRATE on the cross member like hell. i mean, heck.

    57.jpg

    58.jpg
  • wagodizzlewagodizzle Council Member and EDM expert
    forgot to mention the awesome $9 exhaust tip from Advance Auto and please excuse the ugly ugly weld job... :oops: its was my first attempt at welding haha :roll:
  • NJCIVICWAGON1NJCIVICWAGON1 Council Member
    Nice exhaust tip.
  • wagodizzlewagodizzle Council Member and EDM expert
    el oh el.
  • nominousnominous familEE
    jhota wrote:
    www.civicwagon.com

    What's the anodised piece under your rear subframe for ??
  • HaydzHaydz Moderator
    Lower tie bar.
  • ThinkFabThinkFab Wagonist
    156.jpg
    162.jpg
    161.jpg
    163.jpg
  • ragenasianragenasian Moderator
    56.jpg

    55.jpg
  • 300zx300zx Wagonist
    nice
  • NJCIVICWAGON1NJCIVICWAGON1 Council Member
    Im looking into buying the Buddy Club Spec II for 91 EF hatch and modifying it to my wagon. I love the look of only a tip coming out the back. I dont want any muffler showing.

    Pros: Looks great!!! Great performance.

    Cons: LOUD as F*%k!!! You can hear it blocks away :x After a while of Driving....Get abnoxious....

    92.jpg
    93.jpg
    94.jpg

    Its pretty much a straight pipe with a resignator and tip. I might just get the exhaust place make me something similar with a hidden muffler....Still undecided. :roll:
  • duckie8310duckie8310 Senior Wagonist
    "thats hot"

    i say get a shop to do it for you and hide the muffler. its custom and you can get it done anyway you want. plus, if you mess up the buddy club muffler, you're out how much ever money you spent on it. and, you could use a muffler that isnt so loud but still gives you the looks and performance you want.
  • NJCIVICWAGON1NJCIVICWAGON1 Council Member
    True...I agree. Thanks.
  • mr_sp33mr_sp33 Wagonist
    Wago Dude wrote:
    straight out the back then into a bendy muffler.. sorta OEM i guess

    -2.25 inch piping.
    -shitty turbo box (yuck)

    its all "temporary" till i get a Thermal R&D muffler. then imma route it down next to/under the LCA.

    to go this route you have to be really careful, otherwise it will VIBRATE on the cross member like hell. i mean, heck.

    57.jpg

    58.jpg

    wheres your driveshaft mount?
  • mvmmvm Wagonist
    The final result was a Magnaflow Highflow Stainless Catalitic Converter, TurboPack Resonator, 2-1/4" Pipe, Magnaflow Stainless Muffler, & Custom Stainless Tip.
    115.jpg
  • NJCIVICWAGON1NJCIVICWAGON1 Council Member
    Nice!
  • wagodizzlewagodizzle Council Member and EDM expert
    mr_sp33 wrote:

    wheres your driveshaft mount?

    no where mines a 2WD
  • nominousnominous familEE
    NJCIVICWAGON1 wrote:
    Im looking into buying the Buddy Club Spec II for 91 EF hatch and modifying it to my wagon.
    Have you ever heard one?
    I had the pleasure of driving one on a CRX I picked up for a friend. When he left the house I heard him join the motorway 3miles away. I'm not kidding.
    It was the loudest exhaust I've heard. You just couldn't drive it without a full face helemet to hide your shame :lol:
    I bought this (only to chop up cos it was cheap). I started the car with it on just the once to see how bad it would be:

    http://www.nominous.com/pics/sale/engin ... C01166.JPG

    Had to promise my flat mate never to do it again. 2.5" to a straight through can on a B20VTEC. Deafening.
Sign In or Register to comment.

© Vanilla Keystone Theme 2025