New to Honda Civic Wagon='90 Red 4WD

Boostin4WDBoostin4WD Wagonist
in Rides & Builds- Civic wagons
What is up all you fellow wagon owners. im new to the wagon scene and hope to meet alot of you fellow wagon owners. i my self own a 1990 red RT4WD wagon. its been a pretty nice honda. i have owned a few other cars and other hondas. my only other old honda i have owned was a EF CRX. its was ok just not roomy enough ive owned two EG hatches and one EK hatch which i miss the most. the EE wagon is tight i love it and it turns heads may not be for the right reason but heads still turn. heres a few pics. i have modded it a little for now got a HID KIT and a in dash DVD/CD player. and have a list of things that i want to complete. well i hope what i do to the ride will be a nice addition to the wagon family.

PICS:

165.jpg
166.jpg
167.jpg
168.jpg
169.jpg
170.jpg
171.jpg
172.jpg
173.jpg
«13

Comments

  • shift_wagovanshift_wagovan Wagonist
    Welcome. Nice wagon. What kind of HID's are those?
  • Boostin4WDBoostin4WD Wagonist
    shift_wagovan wrote:
    Welcome. Nice wagon. What kind of HID's are those?
    HIDS i bought from a supplier on the eastside his sells stuff on ebay. they work awesome best 80 dollars ive spent. :lol: :lol: :lol:
  • HxCforeverHxCforever Wagonist
    very nice
  • 300zx300zx Wagonist
    I have the same hub caps on my civic.
    Honda Fit, Right?
  • Boostin4WDBoostin4WD Wagonist
    yep them be FIT CAPS and actuall wheels from fit with the stupid small skinny oem tires
  • 300zx300zx Wagonist
    ME TOO!!!
  • freddogg509freddogg509 New Wagonist
    welcome along....wagon looks nice....by da way how far r u from yakima????
  • Boostin4WDBoostin4WD Wagonist
    thanks for the comments im like 3 to 4 hours away.
  • Boostin4WDBoostin4WD Wagonist
    Holy cow it's been along time since I posted the wagon in which I still own and drive. Well today I picked up some brand coilover sleeve kit. Going to throw those on tomorrow with the brand new KYB AGX struts. I'll post some pics of before and after. Also installing a MOMO racing steering wheel and hub. But other than that I got new tires about a little over a month ago fir the wheels and hub caps that she came with at the beginning.
  • Eagle BeagleEagle Beagle familEE
    no substitute for an
    easy sunday moaning ey...

    :mrgreen:
  • Boostin4WDBoostin4WD Wagonist
    well today was a a glorious day. Got the coilovers installed. The steering wheel put on as well bust day for the wagon. All worth the labor because she is slammed and looking good. One problem came up after in stall. Some scraping on the front flaps when pullin Into drive ways. Also found out my drivers front LCA is bent so my front wheel rubs a little during sharp turns since my wheel is slightly closer to my firewall. But no big deal. Just got to get some wheels.

    434.jpg
    435.jpg
    436.jpg
    437.jpg
  • MattKoMattKo Wagonist
    Nice ride. I'm not a big fan of red but it looks good on your wagon.
  • draginmywagondraginmywagon Senior Wagonist
    are your hubs from a honda fit... lol.. not a big fan of the wheel, should have left it stock..
  • Boostin4WDBoostin4WD Wagonist
    Yeah red is what I had to deal with. Free shocks so can't complain.lol. Yeah the wheels are the same ones I got from day one of owning this car. Working on getting some diamond wheels. Since I'm a painter for a body shop painting the wheels some crazy color shouldn't be an issue. If anyone has any pointers or suggestions on size and offset for wheels shoot st me . I just want them to fit with no flaring maybe Roll. As long as there tucked and rubber strecthed.
  • Boostin4WDBoostin4WD Wagonist
    So today we got a little slow at the shop. And saw we had a 2009 jeep liberty that got rear ended pretty good. It took part of the exhaust and bent it pretty good but the muffler lived on. So I had an idea to modify my exhaust again. Seeing as how the first one I did wasn't up to my standards anymore. There's a few photos of before. This exhaust system came from parts of a Dodge Journey which also suffered a rear collision. I cut my n-pipe from stock res and used the Journey piping and res to complete the rest. And topped it off with a muffler tip from one of two good mufflers left off the Journey. Thus the product you see below. That was done about three months ago because some idiots(drunk) decided car was to cool to have the stock exhaust connected anymore. So the broke it from the rear axle section. But today I used the Jeep Liberty exhaust to make a free J-Racing wanna be exhaust check it out. Basically just practicing my welding for when I throw on the burns stainless on for the final master piece.lol

    470.jpg
    471.jpg
    472.jpg
    473.jpg
  • doitdubdoitdub familEE
    Free is good....but it should have came out the other side! :lol:
  • WagonWagon Wagonist
    doitdub wrote:
    Free is good....but it should have came out the other side! :lol:


    lol, saves on piping though!
  • Boostin4WDBoostin4WD Wagonist
    Yes I know it should have been placed in the stick location but I didn't have any free piping left to route it out that way and still keep it mandrel bent. Lol
  • DomDom Banned
    You could have just went over the driver side rear lca and straight out the back.
  • Boostin4WDBoostin4WD Wagonist
    Well after I get the motor all done and setup I'm going to run a burns stainless setup with a nice stock flavor but with sound and performance in mind.
  • Boostin4WDBoostin4WD Wagonist
    Did my taxes today and going to get a pretty decent return. So I thought i would update my thread and let everyone know that I may have a the sohc vtec with nice new clutch in before the end of the month. Which would be awesome because the a6 is cranking out almost 233k. She runs like a top bit the cable guide seals are starting to go. She smokes every once in awhile it's a bit embarassing.
  • Boostin4WDBoostin4WD Wagonist
    Been hitting up craigslist for the last week looking for a roof rack with snow
    board attachment. Well today someone actually came threw and poom pow I got a pretty nice yakima rack with diffuser for 175 a lil spendy but once it was on all worth it becuase it looks nice. Pics up tomorrow.
  • Boostin4WDBoostin4WD Wagonist
    Here are those hot juicy picks of my wagon and it's new/used roof rack.lol. Not SLR pics bit 3GS pics aren't that bad. Haha.
    95.jpg
    96.jpg
  • draginmywagondraginmywagon Senior Wagonist
    the rack looks sick.. you still have you old steering wheel.. how much did you want for it..
  • EDwEFprtsEDwEFprts Senior Wagonist
    i'm liking the free exhaust.
    Boostin4WD wrote:
    ...I got a pretty nice yakima rack with diffuser for 175 a lil spendy but once it was on all worth it becuase it looks nice...
    not a bad price, especially if it came with clips to fit the wagon.
  • Boostin4WDBoostin4WD Wagonist
    EDwEFprts wrote:
    i'm liking the free exhaust.
    Boostin4WD wrote:
    ...I got a pretty nice yakima rack with diffuser for 175 a lil spendy but once it was on all worth it becuase it looks nice...
    not a bad price, especially if it came with clips to fit the wagon.
    thanks man. It was a good find no doubt there. I'm just workin on gettin the wagon to WAGON OF THE MONTH nominee stauts.
  • Boostin4WDBoostin4WD Wagonist
    Today got around installing new rear LCA'S Buddy Club P1's. There really nice and the best quality ones I have ever seen for a Honda. Here's a few quick pics. Let me know what you guys think.
    207.jpg
    208.jpg
  • wagobrad91wagobrad91 Wagonist
    nice lookin good, to bad they didn't have a rando color
  • JordanXXXJordanXXX Wagonist
    fucking loving the wagon man.
    nice job
  • Boostin4WDBoostin4WD Wagonist
    JordanXXX wrote:
    fucking loving the wagon man.
    nice job
    Thanks man. Really trying to build it with quality and finess.
Sign In or Register to comment.

© Vanilla Keystone Theme 2025