looking for pics of the installation of the intercoolers

949

im stuck on my turbo mod.

i have the turbo kit from greddy and the intercooler piping is giving me big trouble. i dont know where to go from here now. the ic doesnt even match up so i have to some how mod the flanges to bolt up to the car itself. but for now i need to know where the driver side piping will go? do i need to drill a now hole or just run the piping under everything then to the right. if i do that it seems to be pretty low. the passenger seems to look fine. its just the driver side that i am having trouble with. so any pics will help me figure out what i need to do.

turbo_teg

there a few different ways to do the drivers side charge pipes or atleast the 3 I always see are either through the hole that your window washer fluid goes (of course u will need to remove the bottle), under your core support in a narly ass bend (this is what i have) and then u can also cut a hole in your core support and use a 90* elbow like another turbo wagon on here did. if u can post some pics of the set-up and how u think the charge pipes go.

shift_wagovan

What size is your intercooler?

949

turbo_teg wrote:

there a few different ways to do the drivers side charge pipes or atleast the 3 I always see are either through the hole that your window washer fluid goes (of course u will need to remove the bottle), under your core support in a narly ass bend (this is what i have) and then u can also cut a hole in your core support and use a 90* elbow like another turbo wagon on here did. if u can post some pics of the set-up and how u think the charge pipes go.

thanks for the reply.

i have a horrible imagination so with out pics i have no ideal how to picture these 3 ways u are refering too.

i got these from greddy. do i need to buy more piping to what u are refering me too.


http://www.greddy.com/img/PHP/products/pdf/760.pdf

turbo_teg

thats for a newer civic