Extended shifter needed for 91 rt4wd

fast freddy

I've searched and even wrote a few people who have them, but I have not heard back from them as of yet. I need to know if I can buy a angled and extened shifter or do I have to make my own.
If I have to make my own, does anyone have one they'd like to sell? It's going to be for a center console Im going to start working on but this shifter is a vital piece. Thanks.

bam-bam

I don't believe I've ever seen such a piece. Just add on to the stock one as you like.

Charb

bam-bam wrote:

I don't believe I've ever seen such a piece. Just add on to the stock one as you like.

If you're just using the extension, it should work the same...

bam-bam

I have an old Michelob tap I think I'll stick on mine.

Charb

bam-bam wrote:

I have an old Michelob tap I think I'll stick on mine.

Back in the day I had a Ford Fastiva that I used for delivery pizzas.

One day, my brother and I got the idea to rice it out. Baaaad! Duck tape stripes, literally used a Folgers can on the exhaust, etc.

Then I stole a Henry Weinhartds tap from work.... and it installed PERFECTLY. SO awesome! Seriously, it was epic. People in cars next to me would notice.... laugh, and give the thumbs up.

wyld kardz ee2

My friend has a Michelob tap in his cream eg hatch.Although I think it has a bottle cap top.

Darin

i cut mine and welded a 1/2"x6" black iron nipple on it.turned out great.and the welds stayed under the boot so you couldnt see them.

fast freddy

Looks good!!

Georgie

Couldn't you just buy the Circuit Hero brand shift extender and bend it into the "S" shape you wanted to?

http://www.circuithero.com/products.php
About half to three quarters down the page.

fast freddy

Georgie wrote:

Couldn't you just buy the Circuit Hero brand shift extender and bend it into the "S" shape you wanted to?

http://www.circuithero.com/products.php
About half to three quarters down the page.

Dude!! Perfect! Will order one Saturday. Thanks!!

Ratrodwagon88

i used a skunk 2 dual bend and cut and shaved it down and hen used a metal rod to extend it out . but i have since learned not the best idea. so took my stock steel shifter and extended the lower "connects to the linkage"and extended it to that of the skunk 2 and then tigged it back and the top end to where my hand sits slightly higher than my steering wheel

motorpunx

If you go to a workshop they'll ask you i think maximum 10 dollars...

Mine is 10 centimeters long

SiRge

Threaded tube, plus another shifter wound in on top? Have grinded the top T piece off so I'm grabbing onto the ball of it. Then friends giving me his stubby short shifter which should lower it down and make the throw not so epic too.

fast freddy

Just installed and LOVE IT!!!!!!!!!!!!!!!!

Abide

i have a moddiction extender and knob on my s2k. nice and wont stand out as much as the silver http://shop.moddiction.com/Moddiction-2 ... er-005.htm

DRMORTY

SiRge wrote:

Threaded tube, plus another shifter wound in on top? Have grinded the top T piece off so I'm grabbing onto the ball of it. Then friends giving me his stubby short shifter which should lower it down and make the throw not so epic too.

Holy Crap! Now that is a Tall Shifter! Almost looks like you can keep you hands on the wheel & shift..

Pic of it with the T handle shaved off..

fast freddy

Abide wrote:

i have a moddiction extender and knob on my s2k. nice and wont stand out as much as the silver http://shop.moddiction.com/Moddiction-2 ... er-005.htm

I do like the black!! But it's only a 2.5 inch extension.

wagonef8

i just cut and welded my shifter lol its a little weird at first but I like it

Dj Hentai

Not my wagon, but I have a 21" extension in my minitruck.

You can see it towering over teh dash lol here in this shot, skull for shift knob, and yeah the eyes light up.