To clarify, the corner lights are SHUTTLE/WAGON SPECIFIC. There are two variations available, clear parking lights (JDM/EDM) and amber indicators (USDM).
Were you referring to the corner lights or the indicators in the face of the bumper? If you were talking about the atter then you're in the wrong thread.
Were you referring to the corner lights or the indicators in the face of the bumper? If you were talking about the latter then you're in the wrong thread.
i believe he was referring to the turn signal indicators in the bumper.
i know this is kind of an old thread but i just sent password and Email regarding the corner lights
im hoping the fact that i am affiliated with the only real dealer in the try state area of MI/IN/OH that it might help
i will update with whatever info they get back to me with
I believe it is kyrlon that makes a "stained glass" spray paint. Its yellow if its applied thin, but with more layers it turns more amber. Ive had a few da's and done the fog lights yellow and the bumper lenses amber with the same can a few times, and just did the bumper lenses on my new wago. Micheals crafts stores carry it, its like 5 bucks a can
I believe it is kyrlon that makes a "stained glass" spray paint. Its yellow if its applied thin, but with more layers it turns more amber. Ive had a few da's and done the fog lights yellow and the bumper lenses amber with the same can a few times, and just did the bumper lenses on my new wago. Micheals crafts stores carry it, its like 5 bucks a can
That's what I used. I did probably 10-15 coats. Seriously a bunch. It gets pretty dark, but it's the only way to balance out the reflector. I did a shitty prep job too. But it still looks great until you look really really close.
yea....ive done it a few diff times and the thing that always gets me is that it looks light like it needs more coats, then you put the part back on the car and its darker then it looked. but so far so good and i really like the stuff. your "amber" corners look nice
88-89 corners WILL fit (roughly) into a 90-91 wagon, but you will need the 88-89 tabs that pop into the fender for the screws to go through. this is a super easy fix.
however --> 88-89 have locking tabs that pop into the headlights. 90-91 headlights did not have this (it has sliding tabs instead), so you may run into issues there. i did when i was putting 90-91 lights on an 88-89 hatchback, i just ended up using the 90-91 headlights. you could just dremel off these tabs and simply rely on the screws to hold the lights in, i suppose.
you can swap the headlight brackets (i've done this) but the results are kinda "meh." some of the mounting holes dont line up so you cant use them all and just overall, not worth it...
you can swap the headlight brackets (i've done this) but the results are kinda "meh." some of the mounting holes dont line up so you cant use them all and just overall, not worth it...
Dang! That makes me disappointed, i have mismatched corners and ... yeah
Its ugly.
Comments
Were you referring to the corner lights or the indicators in the face of the bumper? If you were talking about the atter then you're in the wrong thread.
i believe he was referring to the turn signal indicators in the bumper.
they would be down..
Thanks
Mike
im hoping the fact that i am affiliated with the only real dealer in the try state area of MI/IN/OH that it might help
i will update with whatever info they get back to me with
Good for you, but this is a discussion on corner lights.
http://cgi.ebay.com/ebaymotors/HONDA-CI ... 4cf3d46cda
anddd for Password or even DEPOT to make a copy of the corners. im damn sick of paying $100 a set.....for used ones!
DEPOT makes some sweet corners for many other cars, and i think the quality of them are better than the units ive gotten from password...
ill try and email them tomorrow. need to find their contact information
anddd for Password or even DEPOT to make a copy of the corners. im damn sick of paying $100 a set.....for used ones!
DEPOT makes some sweet corners for many other cars, and i think the quality of them are better than the units ive gotten from password...
ill try and email them tomorrow. need to find their contact information[/quote]
Depots quality has gotten a lot better throughout the years! as per PasswordJDM i dont know much. Hopefully they make them.....
That's what I used. I did probably 10-15 coats. Seriously a bunch. It gets pretty dark, but it's the only way to balance out the reflector. I did a shitty prep job too. But it still looks great until you look really really close.
Half way through:
From:
To:
but just wanna be sure before i buy some online...
SO WILL THEY FIT? thnx
the 90-91 do not have a screw in them.
So yes they will fit...but you dont have anywhere to screw them into, unless you make your own hole.
88-89 corners WILL fit (roughly) into a 90-91 wagon, but you will need the 88-89 tabs that pop into the fender for the screws to go through. this is a super easy fix.
however --> 88-89 have locking tabs that pop into the headlights. 90-91 headlights did not have this (it has sliding tabs instead), so you may run into issues there. i did when i was putting 90-91 lights on an 88-89 hatchback, i just ended up using the 90-91 headlights. you could just dremel off these tabs and simply rely on the screws to hold the lights in, i suppose.
but i cant find it search gives me a million posts ...
Dang! That makes me disappointed, i have mismatched corners and ... yeah
Its ugly.
Anyone knows where to get them?
http://www.ebay.com/itm/HONDA-CIVIC-90- ... 298wt_1037