Axel question

90s_fan90s_fan Wagonist
in Engine & Drivetrain
well i wanted to put a b16 in the wagon because it already has the b16 harness and computer but havnt been able to find a b16 drop out. i have done a few b18a1 swaps in efs so i know pretty much how to do it. i found a low mile 90 or 91 da integra the b18a1 but is auto but the whole car is there and he only wants like 500. the tranny is bad but my question is can i use the auto axels and intermediate shaft for the swap? im not sure the difference between auto and man axels if there is. then the only thing id need is to find a tranny.


thanks guys

Comments

  • CharbCharb Administrator
    I'm pretty sure they're different.

    Go to autozone or some other website, and cross reference the part numbers.
  • cbaracingcbaracing Wagonist
    auto and 5spd axles are the same but the auto and 5spd intermediate shafts are different
  • 90s_fan90s_fan Wagonist
    cbaracing wrote:
    auto and 5spd axles are the same but the auto and 5spd intermediate shafts are different

    thanks yeah thats what i was thinking. i called a few parts store and they said auto and man call for the same part numbers so ill have to find a man cable trand and inter shaft. o and a manual harness i think cuz they are different.

    correct me if im wrong on the harness guys.


    thanks for all the help
Sign In or Register to comment.

© Vanilla Keystone Theme 2025