I am happy to see someone on here who doesn't want to join the hype of dropping the wagon into a street sweeper. I have gotten spoiled since I have been driving cars with suspensions in them. Can't wait to see the other mods you have planned. A wheel on the back hatch would be awesome.
i want to see that project all ready done... hurry bro
man thats easier said than done :!:
since i work 86 hours a week...
Well and the wagons not @ my house but like 11 miles away n a field and i have ran out of daylight each time ive been out working on it ......
HOPEFULLY i will get to bleed the new big brakes this evening .... and then it will b safe enough for bringing it home...
Take your time. Mine has been down for over a year. It sucks not to drive it but this gives me more time to do it right, and to see if I have missed anything.
Take your time. Mine has been down for over a year. It sucks not to drive it but this gives me more time to do it right, and to see if I have missed anything.
man i have to have mine up and running for this winter .. its got to get me thru the snow... thats the whole reason i got it..... my lowered first Gen Odyssey is to low for snow....
MOMS NATURE is trippin again its storming here again..
im hoping when i get the 70 miles to my wagon its nice and sunny out there... and i can put the finishing touches on the wagon and drive it home this evening..
i got it all wrapped up last night before dark but no one to help bleed the brakes...
oh and MOMS Nature drenched me i dumped water out of my shoes ..
oh got a lil dirty...
ok still making progress with Scrappy... ☆ sorta ☆
had a helper that was working on the belts while i did the brakes & knuckles..
saturday morning the front big brake upgrade got a mean test .... stops on a dime or better slid on a dime ... ( have to install the rear parts another time ..)
☆ but ☆
as i started out to the Chevy Chase, MD meet, i was heading down a curvy back road and heard a strange noise ... but i had no pull off spot ZERO Shoulder and lots of traffic on this road ... like 2 minutes later i heard a clinking sound .. then heard something hit the street.. few seconds later something went zooming across the other side of the road ... i was like WTF.... :?:
:idea: Detour..... over to a buddies house and what do u know ... lost the power steering tensioner & the a\c belt .. not sure how but the power steering belt was just a swangin' on the pump as i opened the hood ....
i also noticed my temp gauge didn't work so the sensor got replaced and still nothing flat line on the dash.. ok so im leaning toward just replacing the entire dash cluster ... i have been reading all kinds of links and swap sites...
so whats up can i get a few opinions ( all r welcome ... )
this is the dash cluster i would like to get n carbon fiber for my 88 rt4wd...
Then find a nice upgraded gauge that will flow with it..
or
or
☆ Update ☆ 18th of August 2010
Scrappy getting his first fill up of Sunoco Super ... GOT 8k HID...? :?:
first fast food stop.... you know it had to be Burger King...... " I like to get it my way..."
oh snap i cant leave someone got a Blue Light Special "BLS" had us blocked in
first trip to work up and over Paris Mountain and wow its nice and foggy..
well im daily driving Scrappy now the last 2 days....
this was last night hanging out with Kyle and Hoodbridge
then on the way home @ almost midnight decided to slip thru our first carwash... peek @ those led corners...
hahaha glad to see it running man. I was going to suggest one of those hand pump bleeders too, but it looks like you got some help. Those auto bleeders are a lifesaver. Best investment evar.
Keep it up man. Can't wait to see this thing jacked up with some off road tires
hmmm i really want some meshies now! they look really good on your wagon man! glad to see scrappy up and running! the 8k look really good too i cant wait to get some HIDs in my wago!
just a small up date...
got new front bearings and extended studs
oh yeah hit up the junk yard no more rusty door or left front fender we dont need no stinking door
picked up some tires for mini cookie cutters
Scrappy was a good pup for dragging that integra around so i got him something for the WagoPalooza2010 trip
I was just thinking. I have some of those EG forks if you want to trade your oem ones. I have two sets, and the wagon sits a little too low using the factory struts in them with my extended top hats.
I was just thinking. I have some of those EG forks if you want to trade your oem ones. I have two sets, and the wagon sits a little too low using the factory struts in them with my extended top hats.
fair nuff Kyle... once i get back from WagoPalooza we can do that .. :idea: i want to grab some adjustable a~arms also..
just got few uploaded so far ..
but here u go... mornings looked prettier up there n the mountains.....
Lets follow Bam...
wow where did that road go..?????
got water..?????
Got Parts..????
i like this alot haha. i kinda wanna do this to my wagon, but i also want to slam it... decisions, decisions.
my decision was made for me last year when i could not get my lowered Honda Odyssey around n the snow storm that shut down the Virginia area like a week....
Comments
since i work 86 hours a week...
Well and the wagons not @ my house but like 11 miles away n a field and i have ran out of daylight each time ive been out working on it ......
HOPEFULLY i will get to bleed the new big brakes this evening .... and then it will b safe enough for bringing it home...
MOMS NATURE is trippin again its storming here again..
im hoping when i get the 70 miles to my wagon its nice and sunny out there... and i can put the finishing touches on the wagon and drive it home this evening..
i got it all wrapped up last night before dark but no one to help bleed the brakes...
oh and MOMS Nature drenched me i dumped water out of my shoes ..
oh got a lil dirty...
probably not the best bleeding brakes yourself, but possible with them.
http://www.summitracing.com/parts/RUS-639590/
(cut your finger nails)
had a helper that was working on the belts while i did the brakes & knuckles..
saturday morning the front big brake upgrade got a mean test .... stops on a dime or better slid on a dime
☆ but ☆
as i started out to the Chevy Chase, MD meet, i was heading down a curvy back road and heard a strange noise ... but i had no pull off spot ZERO Shoulder and lots of traffic on this road ... like 2 minutes later i heard a clinking sound .. then heard something hit the street.. few seconds later something went zooming across the other side of the road ... i was like WTF.... :?:
:idea: Detour..... over to a buddies house and what do u know ... lost the power steering tensioner & the a\c belt .. not sure how but the power steering belt was just a swangin' on the pump as i opened the hood ....
i also noticed my temp gauge didn't work so the sensor got replaced and still nothing flat line on the dash.. ok so im leaning toward just replacing the entire dash cluster ... i have been reading all kinds of links and swap sites...
so whats up can i get a few opinions ( all r welcome ... )
this is the dash cluster i would like to get n carbon fiber for my 88 rt4wd...
Then find a nice upgraded gauge that will flow with it..
or
or
also want to get an a pillar if they make one to fit our wagons for the other gauges i need .. ( i like to know whats going on n my ride.. especially since im getting an entire motor built)
looking for the diagram for my wagon..
http://honda-tech.com/showthread.php?t=2492770
http://www.honda-tech.com/showthread.php?t=2443255&page=5[/quote]
Scrappy getting his first fill up of Sunoco Super ... GOT 8k HID...? :?:
first fast food stop.... you know it had to be Burger King...... " I like to get it my way..."
oh snap i cant leave someone got a Blue Light Special "BLS" had us blocked in
first trip to work up and over Paris Mountain and wow its nice and foggy..
those look niiice!!
well im daily driving Scrappy now the last 2 days....
this was last night hanging out with Kyle and Hoodbridge
then on the way home @ almost midnight decided to slip thru our first carwash... peek @ those led corners...
Keep it up man. Can't wait to see this thing jacked up with some off road tires
got new front bearings and extended studs
oh yeah hit up the junk yard no more rusty door or left front fender
picked up some tires for mini cookie cutters
Scrappy was a good pup for dragging that integra around so i got him something for the WagoPalooza2010 trip
fair nuff Kyle... once i get back from WagoPalooza we can do that .. :idea: i want to grab some adjustable a~arms also..
Scrappy is heading down to Georgia Thursday night .....
gonna get some pictures later on today with DaWedge
Headed down to WagoPalooza after work.... come on quitting time
coming from u that means Scrappy is good to go...
but here u go...
Lets follow Bam...
wow where did that road go..?????
got water..?????
Got Parts..????