How many others had to fix this ?

civicboy · March 2010

Rear lower dogleg rust repair.

Eagle Beagle · March 2010

my estimated guess is uhmmm...

actually...what comes next to 2...

so ...

answer:
more had to fix this or tried...

i've seen pictures unless I'm terribly mistaking...
...of who invited the rustdevil anyway uh?

The_Head · March 2010

My 87 Teg was like that. It wasn't worth repairing, I just drove the thing.

leWolf · March 2010

Oh dear lord! Thats a whole lotta rust, so what are you going to do about it?

ragenasian · March 2010

That isn't a whole lot of rust. Mine was about the same. Little sheet metal and some rust proofing products to prevent (rather slow it down) more rust and you are good to go.

Marc_EE9 · March 2010

damn your car is clean underneath! :shock:

Okiewagon1 · March 2010

thats about as good as you can hope for as far as rust goes. Pretty easy to cut that out and weld in new panel. consider yourself lucking its not worse.

civicboy · March 2010

To answer your question i cut it out and welded in patch pieces
then smoothed them over with a Product called All Metal Filler
as i can't stand Bondo. Then used a syringe with POR 15 in it
and sealed anything i could get too. Then made a special nozzle
that is about 16in long to spray into the body panel access holes
anywhere around the repaired area. Done except paint !
I will post pictures later..

leWolf · March 2010

Yeah, i'm from az and rust freaks me out bad! Call me a chicken i guess.

civicboy · March 2010

Could be worse as i came from Michigan where ( rust never sleeps ).
Now out here in Colorado where its dry and i luv it.

88loganm · March 2010

I have the same problem but my car is also from michigan. So spray foam was fine for me..

How many others had to fix this ?

Comments