can u post pictures? of the spacer you got going and of where u got the sway mounted and where u got yyour endlinks itd help me out so much. i got my sway hooked on but the positioning looks like ass hole.
You're endlinks would line up a little better if you turned them around and mounted them on the inside of those black brackets. Remember that that kit is made for the Hatch and CRX, and I doubt ST ever test fit it onto a Wagon.
You might ever get away with attaching them to the sway bar tabs on the ST LCAs. You might have to screw them if from the back side as opposed to the front, and you'll likely need to use some metric bolts, as I'm sure the bolts holes on the ST arms are metric so the OEM stuff could bolt up. You should probably also shorten up the end links (screw them together more).
If you move the sway bar D brackets/bushings to the front of the chassis brackets, will the bar still clear the subframe? I'm going to be doing this sometime soon, so I'm very interested in how this works out.
even thuogh st said the lca wasnt ment to be used withe st sway i got it hooked up and it looks like it will be quite functional just as long as it will be setup like mine is you should be good, i feel although its not what i want but maybe i needa get used to it.
even thuogh st said the lca wasnt ment to be used withe st sway i got it hooked up and it looks like it will be quite functional just as long as it will be setup like mine is you should be good, i feel although its not what i want but maybe i needa get used to it.
(minus those gay brackets on the shock)
Is that a stock midpipe i see in this pic? are you running a stock muffler? Does it look like it's all gonna fit (if that's what you've got)?
Looks to me like it will fit no problem on the passenger side. But when It comes to the drivers side???
even thuogh st said the lca wasnt ment to be used withe st sway i got it hooked up and it looks like it will be quite functional just as long as it will be setup like mine is you should be good, i feel although its not what i want but maybe i needa get used to it.
ill snap some pics 2morow, i just got the da rear sway 2 fit, had 2 bend the center a small amout 2 go around the rear diff but it works,no rubbing,and handles alot beter. almost done the turbo set up as well
Is there an actual write-up that someone has done? I want to see how it is done rather than just looking at it and thinking it is simple but really isn't.
If it's the ST endlinks.Those look like standard fanfare heim joints.One of the best place to get those is @ OSH.Don't know if this store is in other states.It's owned by Sears.I'm sure ST will charge u $$$. Jegs.com has them too.Mo choices.
Comments
thats how my shit look
all this stuff is definetly getting shined up before it goes on the next wagon.
You might ever get away with attaching them to the sway bar tabs on the ST LCAs. You might have to screw them if from the back side as opposed to the front, and you'll likely need to use some metric bolts, as I'm sure the bolts holes on the ST arms are metric so the OEM stuff could bolt up. You should probably also shorten up the end links (screw them together more).
If you move the sway bar D brackets/bushings to the front of the chassis brackets, will the bar still clear the subframe? I'm going to be doing this sometime soon, so I'm very interested in how this works out.
even thuogh st said the lca wasnt ment to be used withe st sway i got it hooked up and it looks like it will be quite functional just as long as it will be setup like mine is you should be good, i feel although its not what i want but maybe i needa get used to it.
(minus those gay brackets on the shock)
Looks to me like it will fit no problem on the passenger side. But when It comes to the drivers side???
Am I seeing things or is that endlink on there wrong? Those brackets are on the wrong side that's for sure.
Now that looks good.
What LCA are these?
No they are not. They were available through Suspension Techniques, but are now discontinued, meaning they are not making them any more.
anyone know where to get those end links? ive hunted around ST's site and i can only find the front sway bar end links. mine are shot.
yeah i bleive the part was for the crx si or something.
http://www.bloxracing.com/bloxshop/inde ... uct_id=189