has to be the easyest mod ive ever done to my wagon

lucskywalkerlucskywalker Wagonist
in Suspension, Braking & Wheels
ok hmmm, ive been putting the whole rear swaybar thing on the backburner for a long time now, mainly for the fabrication part of the whole thing. so yea took me like 20 minutes wow soooo hard :shock: i can see if you didnt lower your wagon you would slightly have a minor spacing problem, i dont even have the lowest drop at all and it was a total bolt on affair, other than drilling one extra hole each side on the chassis for the brackets.

anyways, anyone that has a swaybar and has been putting it off take 20 minutes and bolt it up there! rides great :wink:

i posted this on a different thred because the sway bar link is some good info but some of it just goes way to for into fabrication and wanted to let everyone know 20 min at the most, well if you use crx/hb si bar that is 8)

ill put some pics on that thred when i get the time.

Comments

  • evol911evol911 familEE
    Easy huh?? Try it on the RT :lol:
  • lucskywalkerlucskywalker Wagonist
    evol911 wrote:
    Easy huh?? Try it on the RT :lol:

    :lol: ok you got me :lol: i can see a little problem turned big on that one :lol:
  • SlammedtallboySlammedtallboy Wagonist
    Exactly :twisted:
  • 5thgen4dr5thgen4dr Band Wagon
    My RT came stock from the factory with one. :)
  • evol911evol911 familEE
    5thgen4dr wrote:
    My RT came stock from the factory with one. :)


    PROVE IT!!! I want PICS!!!!!!!!!!!!!!!!
  • White&NerdyWhite&Nerdy Senior Wagonist
    You talking about a CR-V? :lol:
  • lucskywalkerlucskywalker Wagonist
    5thgen4dr wrote:
    My RT came stock from the factory with one. :)

    ???? hmmmm must be sniffin that yayo :lol:
  • SlammedtallboySlammedtallboy Wagonist
    lucskywalker wrote:
    5thgen4dr wrote:
    My RT came stock from the factory with one. :)

    ???? hmmmm must be sniffin that yayo :lol:

    Exactly :lol: :lol: :lol: :lol:
  • NZ-DB8RNZ-DB8R Moderator
    got pics of how you mounted it?
  • lucskywalkerlucskywalker Wagonist
    NZ-DB8R wrote:
    got pics of how you mounted it?

    ill take some with my cell phone tomorrow i guess, they cant come out any worse than my messed up digicam :cry: but ya 2morrow.
  • lucskywalkerlucskywalker Wagonist
    here's a quick pic, the install is 90% complete just have to finish the drilling and adding of the 2nd mounting bracket bolt (was too tired at the time) but really i dont see any ill effects with just 1 bold but anyway this weekend im going to do it just for kicks :| and just some side info for rtfwd owners i do think if you mount it the way i did (on the back side of the lca) you will clear the axle! if it clears the strut it clears the swaybar link by a mile!

    489.jpg

    490.jpg

    you dont have to put the link in the front of the lca like factory does, seems to work just fine for me. while it clears the rear sub frame i did hammer the seam in for some extra clearance i will clean that up a little when ive got time :wink:


    i will add my way to the real rear sway bar thead and take a step by step as well, seem my new cell phone takes ok pic's hmm kinda surprised :lol:
Sign In or Register to comment.

© Vanilla Keystone Theme 2025