haha I got that one for free years ago (was my first car), I did gymkhanas and rally sprints and sa few hill climbs in it and it never had any problems, was slow as shit nad steering didnt self center. but man it took a beating
Ok , little update, I have found a d15b vtec for cheap so i'm going to strip it down and give it a good clean up and try my hand a port polishing etc, hopefully ill have a good well flowing head. I need to do my head gasket some I think so ill work on this head and get it nice and when i do the gasket ill stick the modded head on.
And If a can find good deals i might build the d15 up a little
got the d15 yesterday nad stripped and cleaned the head down in 1.5 hrs, it was quite tidy but its been sitting so i thought I'd best give everything a good clean
It was working (aircon) good, and I regased it at work and it decided not too, Ill get inspores enough one day to fix it, but its winter and its cold so i dont need it, the warm and all the vents work fine
I installed my new strut brace today, I wasnt too sure if it would clear the alb or not, It just does.
I have pics of the reciend addition to the family
Just had a look and my intake looks pretty shit so Ill sort it out sometime, going to do my new bumper this week sometime
Sweet!!! it powers up but no start.
I only got 2 codes
19 & 22
22 VTEC pressure valve- I havent connected that yet
19 Automatic transmission lockup control valve doesnt matter as car is manual but comp. is auto
I have no spark so ill swap my obd1 dizzy in tomorrow after work and see how things go
The drivers side wheel bearing had WAY too much play in it so I replaced the hubs with hubs off my coupe, That means I now have bigger discs and calipers
I also replaced the discs and pads while I was at it
I still need to bleed the brakes but thought i'd stick the wheel on and check clearances
Comments
I'd like a facelife bumper but its a bit much and i like to be different so if everything goes according to plan you'll see the results soon
Here are the pics of the beastie
And If a can find good deals i might build the d15 up a little
got the d15 yesterday nad stripped and cleaned the head down in 1.5 hrs, it was quite tidy but its been sitting so i thought I'd best give everything a good clean
Here is a pic of my dash and steering wheel
Love the Heater controls. I need a setup like that for my hatch.
This is true, mine also only realises you have changed the temp from hot to cold after about 15mins
I like how you say "should" even if I turn it all off there is still warm air coming from somewhere
Its the RTI INtrac one lol, it is pretty fat but is nice to use
ever wonder a easy way of lowering the rear of your wagon?
stick a load of tiles in it
only half at a time in the wagon
http://www.trademe.co.nz/Browse/Listing ... =214296748
Also, just me or is your new bumper exactly the same as your current one?
the new parts wagon has only 135000km or 80k miles on it, the interior is mint, will theif some body panels off it
Pics up tomorrow
I have pics of the reciend addition to the family
Just had a look and my intake looks pretty shit so Ill sort it out sometime, going to do my new bumper this week sometime
hmm the colours dont seem to match do they?
I only got 2 codes
19 & 22
22 VTEC pressure valve- I havent connected that yet
19 Automatic transmission lockup control valve doesnt matter as car is manual but comp. is auto
I have no spark so ill swap my obd1 dizzy in tomorrow after work and see how things go
Since noone has brought this yet
I also replaced the discs and pads while I was at it
I still need to bleed the brakes but thought i'd stick the wheel on and check clearances
Looks sweet, I feel the motivation building for my own shuttle
I passed mine with flying colours at VTNZ yesturday, was complimented on having such a tidy Shuttle