washer trick(solved)

oilspotoilspot Wagonist
in Suspension, Braking & Wheels
Back wheels are tucked like crazy after dropping my car.
Need to do the "washer trick". I've read that the bolts are too short and that I need longer ones. Anybody have any specs on what size/ length bolts I need?

Comments

  • lucskywalkerlucskywalker Wagonist
    just take the amount of washers your gonna use and add that to the end of the new bolt, id say 1/2" longer will do the trick.
    careful those holes will strip out real easy, take your time :wink:
  • SiWagonSiWagon Council Member
    For more on the ,''washer trick ''& other suspension tricks read the 1st paragraph under,''Lowering'':

    http://www.hondacivicwagon.com/board/vi ... php?t=4390
  • oilspotoilspot Wagonist
    sorry... I was unclear.
    The info I am looking for is just the bolt size that I'll need.
    ie. M12x1.25 30 or something of the sorts. Just being lazy. I figured if somebody knew off the top of there head It would save me pulling a wheel, pulling the bolt, measuring, then putting it back together, driving to get the hardware, etc.

    I'll post what bolt it is you need when I pull one off.
Sign In or Register to comment.

© Vanilla Keystone Theme 2025