They are, 15x8 et10 although I have 5mm spacers front to clear the front calipers and 15mm rear spacers, tyres are 195/50R15 and don't rub at all with rolled front arches
Thanks that's a very good write up! I've sealed all around around the bottom of the front cowl area which is where i think it was leaking from but will have to double check that fresh air vent now i've looked through the guide
Comments
Are those Rota RB rims? Can you tell me what size/offset? Also tyre size? Thanks.
Which it turned out was coming from the windscreen seal, fingers crossed its all sorted now
Cut the resonator box out on the intake
And parked in some leaves
Thanks that's a very good write up! I've sealed all around around the bottom of the front cowl area which is where i think it was leaking from but will have to double check that fresh air vent now i've looked through the guide
Going to get a rear lip sorted asap and start making a rear spoiler
Turns out it was coming from the side of the windscreen through a pin sized hole, sealed with multi purpose sealer and has been fine ever since!
And made a rear lip out of a scrap accord bumper
Next yet should consist of wider wheels an manual gearbox conversion
Makes engine swaps slightly harder work!
Wait what? Teach me
Providing it has a manual fuel pump aswell otherwise you have to run an electric fuel pump.