my new exhaust

ThinkFabThinkFab Wagonist
in Engine & Drivetrain
i used 2.5" from the header back. made all of the bends by doing pie cuts. finnaly got some new pics for you guys. it goes under the drivers side of the lower control arms.

the muffler i used is from TSC (tractor supply co.)
151.jpg
152.jpg
153.jpg
the rear section of the exhaust
154.jpg
155.jpg

Comments

  • wagodizzlewagodizzle Council Member and EDM expert
    im curious to what its going to sound like =) so thats a muffler for a tractor??
  • ThinkFabThinkFab Wagonist
    from the rear
    156.jpg
    close up of some of the welds
    157.jpg
    158.jpg
  • ThinkFabThinkFab Wagonist
    its the same basic exhaust that i have on my turbo hatch. same size pipe, same muffler. it sounds really good, and its deep and mellow. but only if its turboed.
  • ThinkFabThinkFab Wagonist
    rear section completed spare for the muffler
    159.jpg
  • ThinkFabThinkFab Wagonist
    a little wagon background pic
    160.jpg
  • ThinkFabThinkFab Wagonist
    tuckin it
    161.jpg
    162.jpg
    163.jpg
  • wagodizzlewagodizzle Council Member and EDM expert
    wait, are you running back and forth from the garage and the computer posting pics?? :lol:
  • ThinkFabThinkFab Wagonist
    no, i'm waiting for photobucket to load :wink:
  • wagodizzlewagodizzle Council Member and EDM expert
    ahhhh. thats always super slow and annoying. :x exhaust is looking great though ;)
  • ThinkFabThinkFab Wagonist
    yours goes under the drivers side? got any pics?
  • wagodizzlewagodizzle Council Member and EDM expert
    hehe, actually i was wrong :oops:

    the pic only just popped up soon after i posted then i saw it came the opposite side. currently mine goes through the center piece on the rear cross member (its was a temp. exhaust set-up) but i plan on routing it the way you have (just the opposite side) next to the LCA and have it bend back into the "stock" position. ..did i make any sense?
  • KahunaKahuna familEE
    I was going top try the same thing with my car.. Get a sound clip for sure.
  • lalunettelalunette familEE
    ThinkFab wrote:
    163.jpg

    This last pic looks awesome, almost as if you had some kind of grenade launcher back there instead of a muffler.

    The pics you've posted so far look like you've done away with the cat and resonator. Is that right?
  • ThinkFabThinkFab Wagonist
    yep, its strait through besides the tractor muffler.
  • ThinkFabThinkFab Wagonist
    looks like i missed a pic. after i welded the muffler to the rear section(with a turn down tacked on :P )
    198.jpg
  • KahunaKahuna familEE
    Powder coat it FTW!! Rust is a bitch!
  • TremekTremek New Wagonist
    What's the story with emissions and a setup like that?
  • ThinkFabThinkFab Wagonist
    haha, emissions dont apply in michigan. :P
  • KahunaKahuna familEE
    ThinkFab wrote:
    haha, emissions dont apply in michigan. :P
    Thats why I like it in TN, we hate the ozone layer. Haha
  • ThinkFabThinkFab Wagonist
    got it powdercoated today! high gloss black.
    63.jpg
    64.jpg
  • wagodizzlewagodizzle Council Member and EDM expert
    looking good man!
  • ThinkFabThinkFab Wagonist
    BEFOR:

    65.jpg
    66.jpg
    67.jpg
    68.jpg
  • wagodizzlewagodizzle Council Member and EDM expert
    how much did the powdercoat run you?
  • ThinkFabThinkFab Wagonist
    haha, i work there. i just threw it in while powdercoating some other parts. (free :P )
  • curtcurt Wagonist
    thats a lot of welding. looks good
  • ThinkFabThinkFab Wagonist
    it is alot of welding, but i just got the welder, and wanted to test it out. plus pie cuts flow alot better than most muffler shop bends.
  • 91awd91awd Wagonist
    sound clip!!!!!! :D :D
Sign In or Register to comment.

© Vanilla Keystone Theme 2025