It almost touches the battery. I'm looking into replacing it with something factory if possible.
I should make my own build thread. At least for photos.
Keep up the good work, I'll be following along!
I've got all the stuff for the factory intake system, I'd be happy to sell it and shop it of you need it! Definitely should make a build thread (unless you already have and I haven't looked yet lol) thanks man.
Some pics from the blue wagons first rallyx since the balljoint breaking, the stock struts are completely blown. Luckily I have some kyb agx for the front and tokico illuminas for the rear to remedy that problem. You will notice Shenrie's rally wagon in the pics also, almost twins
Installed some Prelude Si seats in the blue wagon, It was a royal pain. But they are so much more comfy and look 10x better.
Also got a bra for the red wagon, put on koni yellows/extended top hats/megan coilovers along with EM poly bushing rear LCAS. I will get some ground controls when I have the extra $$$. Along with that I did my first string alignment, turned out pretty damn close.
Ryan blamed his iPhone for the bad pictures on honda208 haha. I like the progress Ryan, just get that oil leak fixed so you're not going through oil like crazy.
Few pics from Rallycross, There are a few with Shenrie's wagon in them as well!! SO much fun! I installed kyb agxs in the front and tokico illuminas in the rear along with h&r OE sport springs (lowered it more than I wanted) Also, replaced trans fluid and changed the oil!
Beginning of the day, after the first run
The course gradually got more and more greasy, which made for some fun stuff
Well unfortunately the blue wagon was t boned while my daughter was driving it, luckily she walked away without a scratch. The red one was sold...then the guy wrecked that as well. Sad day.
I picked up another rt for cheap, but it needed some help. I put in a Jdm sohc zc, y8 intake manifold, innovative mounts, new clutch, all seals, 4-1 header, 2.5" cat bac, and replaced fixed a bunch of body panels. It's an 88'
This is when I got her home, she was sure purty
I also have a few different wheels to choose from, haven't decided which ones to go with yet.
14x6 enkei aeronautics
15x7 5zigen FNO1R-
16x7 Atech Schneider
15x6.5 Rays Engineering United Arrows
15x6.5 Volk GR-N (before ce28)
Or 15x7 Centra7
I can't decide which ones I want to put on, part of that is also I can't decide if I want to lower it or not. Which is dependent on the wheels I go with ha
Comments
I would have loved to find some ST ones, but these ones will work just fine lol. I really want to find the ST lca's. Thanks man!
I should make my own build thread. At least for photos.
Keep up the good work, I'll be following along!
Installed some Prelude Si seats in the blue wagon, It was a royal pain. But they are so much more comfy and look 10x better.
Also got a bra for the red wagon, put on koni yellows/extended top hats/megan coilovers along with EM poly bushing rear LCAS. I will get some ground controls when I have the extra $$$. Along with that I did my first string alignment, turned out pretty damn close.
Also put in a new deck, kicker front speakers, and 2 pioneer 8" subs
still have yet to ride in this badboy. wtf?? rude.
BWAHHAHDHAHHAHAHAHHAHHAA
killer!
chaos, seriously, you may be the worst picture taker of all time... Love your wagons though!
Shea you can have a ride next time you're over here or I come over there
And come on Bill, I've seen much worse pictures than the ones I take. I know they aren't billboard productions quality lol. Thanks mang.
Beginning of the day, after the first run
The course gradually got more and more greasy, which made for some fun stuff
And here are my two ladies!
I picked up another rt for cheap, but it needed some help. I put in a Jdm sohc zc, y8 intake manifold, innovative mounts, new clutch, all seals, 4-1 header, 2.5" cat bac, and replaced fixed a bunch of body panels. It's an 88'
This is when I got her home, she was sure purty
Also got the ac hooked up and recharged with r12, it blows so cold. I love it
Thanks man! Still needs some more
14x6 enkei aeronautics
15x7 5zigen FNO1R-
16x7 Atech Schneider
15x6.5 Rays Engineering United Arrows
15x6.5 Volk GR-N (before ce28)
Or 15x7 Centra7
I can't decide which ones I want to put on, part of that is also I can't decide if I want to lower it or not. Which is dependent on the wheels I go with ha