Starting from 0:22, there is a ticking noise that comes from drive shaft! I dont know how, but every time drifting in snow it starts beating somewhere! I guess the snow stucks somewhere and the drive shaft gets disbalanced? Its beating to chasis, if you know what I mean..
Starting from 0:22, there is a ticking noise that comes from drive shaft! I dont know how, but every time drifting in snow it starts beating somewhere! I guess the snow stucks somewhere and the drive shaft gets disbalanced? Its beating to chasis, if you know what I mean..
I have already made those bushings from polyurethane months ago , but haven't got time to install them! Will do, thanks! Didn't think that it will be that big difference!
So finally I have my engine swap done! Changed distributor and everything works just fine! Did a street tune with friend, because I was driving with B16 chip (fuel map), now engine runs smooth.. I changed muffler hoping for more silence, but it turned out louder
And FINALLY we had some snow here! I was having fun all night long! Spent one full fuel tank on drifting
I have lots of video from that night, but all from inside. Wana see?
Summer is coming and lots of things to do, some updates soon
Lol "Summer is coming". Winter just started over there if I see those pics man.
No man! That snow in pictures was only that night! In next two days it melted and was gone! Like nothing happened
P.S. I already posted an event in Europe topic, but by the way, on 30 May - 1 June, there is a massive honda meeting in Poland! I will go and any one here from Europe should go!
No man! That snow in pictures was only that night! In next two days it melted and was gone! Like nothing happened
P.S. I already posted an event in Europe topic, but by the way, on 30 May - 1 June, there is a massive honda meeting in Poland! I will go and any one here from Europe should go!
I've seen it pass on other Forums, too bad I can't be there, we should arrange a Europe-Shuttle meeting with the guys from Klub poland :encouragement:
I've seen it pass on other Forums, too bad I can't be there, we should arrange a Europe-Shuttle meeting with the guys from Klub poland :encouragement:
I think Poland is a good place, its 800 km from my home! I don't know if I could go much further just for some meeting! There is already 200 participans, this event will be massive I think..
I think Poland is a good place, its 800 km from my home! I don't know if I could go much further just for some meeting! There is already 200 participans, this event will be massive I think..
It's 800km from my Home too lol, But yeah, to cover whole Europe it should take place somewhere in Poland or a little further south. (Austria, Chechian republic.)
It's 800km from my Home too lol, But yeah, to cover whole Europe it should take place somewhere in Poland or a little further south. (Austria, Chechian republic.)
This build thread is great! Guys I'm based in the UK, I'll be looking to head to the Nurburgring this summer, maybe we should see how many Shuttles we can get there!
So back home from the Honda meet! Fantastic meet organised by polish! About 400+ Hondas and 1000 people where there! Definitely going there next year!
Been busy with some updates before meet, so here's what I have done:
Painted window cleaners:
Did repack my exhaust manifold, nothing changed with those metallic shrubs (except the empty noise dissapeared):
Spent one day polishing rims to get back the shiny look:
Before and after pics:
Also polished my brothers rims for white EK civic:
Figured out to change all bushing including rear hub bearings, got all parts sanded and powder coated:
Before and after pics:
This is how my car looked day before going to Poland
Here in the evening:
Oh yes, also changed rear lugs for longer ones, so I can fit my 1.5 cm spacers:
Made rear lip from Honda Accord 2.2 coupe (front lip), took me one day welding and adjusting it to get right shape, because Accord has much rounder forms than shuttle
Added some stickers and ready to go!
Returning from meeting, made a stop in Lithuania, bought another transmission (115 euros). Maybe some day will need it, never know
So that's for now, hope that my plans will come true, and for september I will have more updates, much bigger, but that's a secret for now
Oh, forgot to add some pics from the meeting event. Got some from the local photographers:
In time attack:
And my favourite:
PS. There was 3 more shuttles, but in not so good condition.
And here is my run on time attack, it's second time I'm driving on tarmac in track, and this time careful because I am far from home Was shocked about times, from all participants with B, K series and turbo's I was below half, in D series 8 best time from about 40 participants (including racers with slick tyres and roll cages and forced engines)
I will add other stuff, like aftermovie of the event when it will be ready if someone is interested!
Took out all interior to weld one small hole in the floor. And do some anti-corrosion work to all body before winter to keep the body in good shape..
Did extend the tophats, to get the car more low and save my koni suspension (front 30 mm, rear 40 mm):
Before and after:
Also cleaned up my old rims, was planning to sell them, but when I got to know that they are "Whey King" rims and searched the internet and found nothing, figured out that they are rare and put them in garage for a while
And these are my new rims:
Still waiting for some parts to be done for my suspension! Hope this week will get my beagle on wheels :cool:
Comments
http://www.youtube.com/watch?v=mCfQIZsa8lE
Sad that winter in Baltic is so warm:( And all the ice on lakes and snow all around are melting....
http://www.youtube.com/watch?v=r-r3lDoa098
Starting from 0:22, there is a ticking noise that comes from drive shaft! I dont know how, but every time drifting in snow it starts beating somewhere! I guess the snow stucks somewhere and the drive shaft gets disbalanced? Its beating to chasis, if you know what I mean..
I have already made those bushings from polyurethane months ago
And FINALLY we had some snow here! I was having fun all night long! Spent one full fuel tank on drifting
I have lots of video from that night, but all from inside. Wana see?
Summer is coming and lots of things to do, some updates soon
P.S. I already posted an event in Europe topic, but by the way, on 30 May - 1 June, there is a massive honda meeting in Poland! I will go and any one here from Europe should go!
I've seen it pass on other Forums, too bad I can't be there, we should arrange a Europe-Shuttle meeting with the guys from Klub poland :encouragement:
It's 800km from my Home too lol, But yeah, to cover whole Europe it should take place somewhere in Poland or a little further south. (Austria, Chechian republic.)
Been busy with some updates before meet, so here's what I have done:
Painted window cleaners:
Did repack my exhaust manifold, nothing changed with those metallic shrubs
Spent one day polishing rims to get back the shiny look:
Before and after pics:
Also polished my brothers rims for white EK civic:
Figured out to change all bushing including rear hub bearings, got all parts sanded and powder coated:
Before and after pics:
This is how my car looked day before going to Poland
Here in the evening:
Oh yes, also changed rear lugs for longer ones, so I can fit my 1.5 cm spacers:
Made rear lip from Honda Accord 2.2 coupe (front lip), took me one day welding and adjusting it to get right shape, because Accord has much rounder forms than shuttle
Added some stickers and ready to go!
Returning from meeting, made a stop in Lithuania, bought another transmission (115 euros). Maybe some day will need it, never know
So that's for now, hope that my plans will come true, and for september I will have more updates, much bigger, but that's a secret for now
In time attack:
And my favourite:
PS. There was 3 more shuttles, but in not so good condition.
And here is my run on time attack, it's second time I'm driving on tarmac in track, and this time careful because I am far from home
I will add other stuff, like aftermovie of the event when it will be ready if someone is interested!
It's from Honda Accord 2.2 coupe (front lip)! Rear 3 seperate part lip would be better (easier to fit), but couldn't get it in here..
Made a custom horn button, originaly there was plastic honda emblem sticker, now real redwood emblem. Did this with chisel..
Still have left a little bit of redwood, I think I will make a perfect one on CNC machine later.
Thats the best color I found for crocs, grey, light blue, white - my favourite colors
Took out all interior to weld one small hole in the floor. And do some anti-corrosion work to all body before winter to keep the body in good shape..
Did extend the tophats, to get the car more low and save my koni suspension (front 30 mm, rear 40 mm):
Before and after:
Also cleaned up my old rims, was planning to sell them, but when I got to know that they are "Whey King" rims and searched the internet and found nothing, figured out that they are rare and put them in garage for a while
And these are my new rims:
Still waiting for some parts to be done for my suspension! Hope this week will get my beagle on wheels :cool: