Right side engine/transmission mount replacement for RT4WD?

CutterfiltoffCutterfiltoff Band Wagon
in Engine & Drivetrain
Hey all!

I've got my 91 RT4WD in the shop for an engine swap. Everything is going well except for one thing. The right side engine/transmission mount is toast. My mechanic friend who is doing the swap for me is unable to locate a replacement part. Are there other compatible mounts? I searched the forum a couple times but wasn't able to come up with anything. Thanks for the help!

Here's the specific part I'm looking for - Honda OEM part # 50805-SH9-202

Comments

  • GriftyGrifty Wagonist
    Unfortunately no, you can buy a set of innovative mounts for $225 or use some windshield silicone in your one for now until you find a good 2nd hand replacement
  • bam-bambam-bam Council Member
    Grifty's right, nothing else is quite the same thing, and Innovative has the only aftermarket one. I filled mine with urethane and have been pleased with the results.
  • skittlenipsskittlenips Wagonist
    Cutterfiltoff wrote: »
    Hey all!

    I've got my 91 RT4WD in the shop for an engine swap. Everything is going well except for one thing. The right side engine/transmission mount is toast. My mechanic friend who is doing the swap for me is unable to locate a replacement part. Are there other compatible mounts? I searched the forum a couple times but wasn't able to come up with anything. Thanks for the help!

    Here's the specific part I'm looking for - Honda OEM part # 50805-SH9-202

    For some reason I can't seem to find that part number on any parts sites, but if you let me know whether or not your car is auto or manual I may have a spare in decent condition for ya. I would still pack it with urethane though.
  • CutterfiltoffCutterfiltoff Band Wagon
    My car is an manual. Thanks for the advice! Does anyone have any particular recommendations regarding silicon or urethane? Is the idea to remove the crumbled old rubber and re-pack with liquid silicon or urethane?
  • skittlenipsskittlenips Wagonist
    I would try to leave at least enough rubber in place to not have to worry about misplacement of the metal sleeve. But, are you still in the market for a mount? Does this look like what you needed? (I can't remember 100% if this is from an auto or manual trans, but I'm pretty sure it's from a manual):

    375.jpg
    376.jpg
  • AbideAbide Council Member
    the rt mount is different than that. Ive been very pleased with my innovate mounts. vibration isnt bad with the 75A durometer ones.
  • skittlenipsskittlenips Wagonist
    Wait so that mount isn't from an RT? There's another piece to it that mounts on the trans...I could have sworn that came off of my RT wagon...if not I must be really loosing track of which parts came from which wagon...
  • AbideAbide Council Member
    ahhh was it two pieces? i know the RT mount bolts to the side of the trans not from the top, but i guess it has been a while since ive seen a stock one.
  • skittlenipsskittlenips Wagonist
    Yeah the piece that mounts to the trans is not pictured...I'm about 85% sure this is from a manual RT trans...
  • bam-bambam-bam Council Member
    Looks right
  • skittlenipsskittlenips Wagonist
    Well, Cutter, if ya need it I'll sell it to ya cheap!
Sign In or Register to comment.

© Vanilla Keystone Theme 2025