Nice rack, I have the same one :encouragement: I put a shovel on mine as well lol
Tire carrier is sweet!
post a pic of yours and how you mounted it. i like this rack. adds alot of space to carry things
i finally got around to installing both sides of the accord suspension on the front with all my front end suspension stuff. new kyb excel g, adjustable control arms, new sway bar bushes, lower ball joints,lug nuts.
the rear is stock wagon setup still. but with the 195 75 14 on bmw bottle caps. it drives down a dirt road and a road fine. but once you flex.... it might rub.
[IMG][/img]
when flexing on a old tree stump the rear tire rubs a bit. i hope onces the lift is in it will bring my tires foward a bit to center the wheel. should stop it from rubbing. also extra height i will gain should make a bit of a difference. if not i will be forced to cut it up. shouldnt be too bad.
[IMG][/img]
[IMG][/img]
[IMG][/img]
still need to install turbo kit with injectors. then plug in a obd0 turboedit chipped ecu.
if the clutch slips on low boost then i am swaping in the clutch i bought. i dont think i am going to use a intercooler either. turbo to intake manifold.
i will install a gauge to see the iat. if it gets high ill let it rest for a bit. but i mostly plan on winter driving so a intercooler isnt needed on low boost for my power goals.
O2 sensor plug is a white, round single wire plug. It's the last plug on the leg of the engine harness that runs along the back of the head( under the distributor). There should be a tang attached to the top right bellhousing bolt to clip the plug to.
By the way, the only OBD0 engines with 2 O2 sensors i've seen personally: A JDM B16, and a B20a1 prelude.
O2 sensor plug is a white, round single wire plug. It's the last plug on the leg of the engine harness that runs along the back of the head( under the distributor). There should be a tang attached to the top right bellhousing bolt to clip the plug to.
By the way, the only OBD0 engines with 2 O2 sensors i've seen personally: A JDM B16, and a B20a1 prelude.
thanks for that info. hopefully i find it next time im messing with the wagon. also i figured the obd0 for most part had only one o2. thanks for ensuring that.
[IMG][/img]
looks like i am going to need a new jack. my low profile jack no longer lifts the wagon.
i would be driving it through the woods but i need to get the rear suspension installed. should be easy to do but i dont have a spacer for the rear trailing arms yet. i have a few ideas but i am unsure if this Al i have is stong enough.
thanks. its been going slow but winter is approaching and i need this finished. i was thinking about selling it. but idk i like this ugly beast of a wagon.
newest update is i fixed the main relay. i parked it for a couple months and went to start it up and it wouldnt catch. checked the spark and fuel so i knew it was main relay.
Is there a name brand/model # on that roof rack? I really like that how it bolts onto the existing rack and is there any slop in it being hooked secured onto the other rack or no?
i seen this on sale on craigslist recently i believe. I'm on long island. you still own it?
i sold/traded this awhile ago. the guy who picked it up off me just sold it. it was a damn fun beater car.
i traded it for a forester and lifted that up. put some 215 70 16 grabbers on it and then i sold that too.
they were both fun cars.
i plan on lifting a b series del sol and running some rally events with it. if you guys can help with that i would appreciate it. i am thinking about da suspension on the del sol
Comments
post a pic of yours and how you mounted it. i like this rack. adds alot of space to carry things
i finally got around to installing both sides of the accord suspension on the front with all my front end suspension stuff. new kyb excel g, adjustable control arms, new sway bar bushes, lower ball joints,lug nuts.
the rear is stock wagon setup still. but with the 195 75 14 on bmw bottle caps. it drives down a dirt road and a road fine. but once you flex.... it might rub.
[IMG][/img]
when flexing on a old tree stump the rear tire rubs a bit. i hope onces the lift is in it will bring my tires foward a bit to center the wheel. should stop it from rubbing. also extra height i will gain should make a bit of a difference. if not i will be forced to cut it up. shouldnt be too bad.
[IMG][/img]
[IMG][/img]
[IMG][/img]
still need to install turbo kit with injectors. then plug in a obd0 turboedit chipped ecu.
if the clutch slips on low boost then i am swaping in the clutch i bought. i dont think i am going to use a intercooler either. turbo to intake manifold.
i will install a gauge to see the iat. if it gets high ill let it rest for a bit. but i mostly plan on winter driving so a intercooler isnt needed on low boost for my power goals.
thanks bam. i was hoping it was for something i didnt need.
now i have to find out where the o2 sensor plugs in. i shouldnt need it with my retune but i would like to know where it is.
just ordered a pair of hatch struts too. to keep that heavy hatch open prop free.
By the way, the only OBD0 engines with 2 O2 sensors i've seen personally: A JDM B16, and a B20a1 prelude.
thanks for that info. hopefully i find it next time im messing with the wagon. also i figured the obd0 for most part had only one o2. thanks for ensuring that.
[IMG][/img]
looks like i am going to need a new jack. my low profile jack no longer lifts the wagon.
i would be driving it through the woods but i need to get the rear suspension installed. should be easy to do but i dont have a spacer for the rear trailing arms yet. i have a few ideas but i am unsure if this Al i have is stong enough.
thanks
i wish i had space to work on it in the garage. but too many builds right now.
hopefully i can get all the parts i have installed and ripping by the time it snows.
thanks. its been going slow but winter is approaching and i need this finished. i was thinking about selling it. but idk i like this ugly beast of a wagon.
newest update is i fixed the main relay. i parked it for a couple months and went to start it up and it wouldnt catch. checked the spark and fuel so i knew it was main relay.
http://www.youtube.com/watch?v=WM8LGNTCtcg&feature=youtu.be
just fixed it today lil while ago
replacement shock mounts? do you mean the rear hatch? or the suspension?
http://www.ebay.com/itm/Rage-Powersport-Black-Widow-Roof-Cargo-Basket-RB-DLX-V2-/390701172011?pt=Motors_Car_Truck_Parts_Accessories&hash=item5af79ac52b&vxp=mtr
Dude you're making Dora the explorer blush!
i sold/traded this awhile ago. the guy who picked it up off me just sold it. it was a damn fun beater car.
i traded it for a forester and lifted that up. put some 215 70 16 grabbers on it and then i sold that too.
they were both fun cars.
i plan on lifting a b series del sol and running some rally events with it. if you guys can help with that i would appreciate it. i am thinking about da suspension on the del sol