3rd Gen FWD wagon brake upgrade options?

Comments

• SiWagon Council Member

  May 2013

  Welcome to our site.Always good to see members from around the world.
  
  As for that link you mentioned that's for the 4g also.
  
  I couldn't find the posting.
  The nice thing about the 3g is if I remember right is a lot of the 1g Integra('85-'89) parts will fit the 3g wgn. like brakes,suspension & eng.Do you have Integras in the Ukraine?That's where you should start the search.
  
  You'll need to check all the following since it's been too long since I modded 3g Civics.Following Integra(Teg) 1g(85-89) parts should bolt on your 3g Wgn.Front rotor/caliper & rear axle along with sway bar rear disc(using your civic axle tube) .4g 4WD Wgn. frt rotor/caliper fits has same size or bigger piston & bigger pads.
  
  Too bad you have a 1.4 carb otherwise the 1g teg fuel injected motor will fit.Maybe you can get a Euro 1g teg carb motor.
  Tip: If you do do the 4 wheel disc upgrade be sure to get the 4 whl disc proportioning valve from the teg too.
• Georgeous Band Wagon

  May 2013

  Thanks a lot! This pretty much answers all of my questions. I had a gut feeling on the integra from the diagrams that I ran into, going through the parts catalogs, my doubt was about whether the whole rear axle should be replaced to retain the integra's rear sway bar.
  And, of course I was hoping for more modern options ) but teg1 will work I guess.
• SiWagon Council Member

  May 2013

  Already answered.

  SiWagon wrote: »

  ...Following Integra(Teg) 1g(85-89) parts should bolt on your 3g Wgn.Front rotor/caliper & rear axle along with sway bar, rear disc(using your civic axle tube) .
• Georgeous Band Wagon

  May 2013

  SiWagon wrote: »

  Already answered.

  Yeah, I got it the first time, I must have said it the wrong way (listing the questions I had from the start), please excuse me my English ) and many thanks for the information!