Terrible gas mileage after head rebuild
wagovanlover
New Wagonist
My 91 DX wagon was getting a little sluggish and my friend does head rebuilds so I had him rebuild mine. Anyway I use to get about 25 mpg and I was hoping for better, but since the rebuild I have been getting about 20 mpg. The car runs strong and isnt throwing any codes so im really confused. I replaced the pcv valve and have done a full tune up recently (plugs, wires, coil, rotor, cap ect.) The only engine upgrade I have done is a cold air intake but that was done a long time ago. The only other problem is a slight fluctuation in my revs at idle. I have read that could be the IAC valve so i pulled one for the pick your part and there was no change. I dont know what else to try or what else it could be. Please help
Any ideas would be appreciated
My wagon-
1991 Civic Wagon
D15B2
Automatic
182,000 miles
head rebuilt 400 miles ago
One last thing. My trans is starting to go out so it slips a little going into second and third but not alot
Any ideas would be appreciated
My wagon-
1991 Civic Wagon
D15B2
Automatic
182,000 miles
head rebuilt 400 miles ago
One last thing. My trans is starting to go out so it slips a little going into second and third but not alot
Comments
If you step on the gas and brake, do rpm's rise?
1) Timing belt marks
2) Valve adjustment