Rear toe need help

nicnicotinenicnicotine Band Wagon
in Suspension, Braking & Wheels
Hey guys this is my first post so im sorry if this was already covered. Im lowered about 1.5 / 2 inches on skunk2 coilovers and struts and i redid most of the bushings with ES.Took it to get aligned and My rear left toe is -0.05 and right toe is -0.15. the shop said that he ran out of factory toe adjustment. I know that my trailing arm bushings are shot. could this be the culprit? and if not what can be done to zero the rear toe?

Comments

  • NZ-DB8RNZ-DB8R Moderator
    RTA bushes effect the toe, you can get RTA bushes with slotted mounting holes to give additional Toe adjustment
  • nicnicotinenicnicotine Band Wagon
    Thanks. Ill have to look into that. Ive only seen a few things on aftermarket toe brackets and shimming.What r your thoughts? And after a little more reading im now starting to worry if something might be bent :nightmare:
  • RoRoRoRo Wagonist
    there is all so after market toe arms that fully adjust
    example
    MR-6110-500x500.jpg
  • maxfromCOmaxfromCO Band Wagon
    i have some wicked tuning ones i got off ebay for like 50 bucks. just get those and your set!
  • NZ-DB8RNZ-DB8R Moderator
    If you get RTA bushes with the slotted holes you dont need aftermarket Toe links.

    I had some Blox toe arms but never needed to use them as the alignment shop said they wernt required, also by moving the whole bush across rather than forcing it with the toe arm the bush will last longer

    Slotted:
    [img][/img]http://www.jhpusa.com/store/pc/catalog/whiteline/whiteline.rta-bushing2_d.jpg
    OEM:
    280.jpg
  • nicnicotinenicnicotine Band Wagon
    Thanks alot NZ! im going to try and get ahold of those TA bushings! Im sure that will get me closer to rear toe spec. But as far as the toe goes, i heard installing the aftermarket toe bracket creates uneven toe lengths which in turn messes up the toe curve between left and right when cornering. you guys know anything about this? and what would be the best way to see if things are bent? Or ill just start saving for new RTA. Which is heartbreaking considering ive had to replace everything els so far.
Sign In or Register to comment.

© Vanilla Keystone Theme 2025