Oil filter - Proper Stuck!

BiMUBiMU Band Wagon
in Engine & Drivetrain
Hi guys,

I've been trying for half the day to get the bloody oil filter off. I've drained the oil and no luck getting off the filter, I've used a oil filter chain wrench but it was on too tight and nearly pierced the old filter. I had to top up with new oil and leave for another day.

How do you guys take off the filter with out messing it up?

I have a 1.6i 4WD. Any help would be great!

Comments

  • NZ-DB8RNZ-DB8R Moderator
    You have to destroy it.

    I usually hammer a long phillips screw driver through it for the bottom and use that as a lever to get it moving.
  • HakosukaHakosuka Wagonist
    I usually get a screwdriver and a hammer and stick it through, then you have more leverage to turn it. It is messy, but it is the only way usually.
    You can try with a belt or some sticky gloves.
  • BiMUBiMU Band Wagon
    Thanks for he reply guys. I'll attempt this and then feedback!
  • SiWagonSiWagon Council Member
    Oil filter can be removed by hand usually.Mechanics usually over tighten them.Some other things to try:

    1)I use a Lisle 63600 Oil Filter Tool($12 aprx) .U attach a 3/8 drive ratchet to it.It has 2 jaws that squeeze into the filter as u unratchet it.
    2)wrap a few rubber bands around the end & unscrew.
    3)Use a mouse pad.The foam side has friction.
Sign In or Register to comment.

© Vanilla Keystone Theme 2025