Got it from a local textile mill, ran me around $50 for the two pieces 1 was 7-1/2 x 4 ft and the other was 4x4 ft , what are you looking for, I could possibly take a look and find what you want and send it out to you!
So ive been having a bit of an issue with the speaker pod
- where it was mocked up was right above peoples heads in the back seat so there was no head room so i had to slide it forward
this caused the issue of where i ran the wiring which was 8" towards the back so the wires were exposed and looked crappy
-my suspension is really bouncy and where i live / my drive way are really bad so the car bounces like crazy all the time, the weight of the speakers + bouncing made the apoxy crack and split therefore making the speaker pod sag down in the middle and not sitting flush with the roof
So today i took the speaker pod out and re ran the wires more up front so now its not in anyones way and sits closer towards the driver
now i have to make up a support system that holds the speaker pod up to the head liner
So ive been having a bit of an issue with the speaker pod
- where it was mocked up was right above peoples heads in the back seat so there was no head room so i had to slide it forward
this caused the issue of where i ran the wiring which was 8" towards the back so the wires were exposed and looked crappy
-my suspension is really bouncy and where i live / my drive way are really bad so the car bounces like crazy all the time, the weight of the speakers + bouncing made the apoxy crack and split therefore making the speaker pod sag down in the middle and not sitting flush with the roof
So today i took the speaker pod out and re ran the wires more up front so now its not in anyones way and sits closer towards the driver
now i have to make up a support system that holds the speaker pod up to the head liner
keep at it and get the kinks worked out. Customization aint always easy. If it was, everyone would be doing their own thing and wouldnt pay for someone else to do it. It will be worth the work one you get it final.
so today I tried to see if integra hatch shocks would it on the wagon
NO is the answer, too long, does anyone know of any shocks that will work in replace of wagon ones?
then I finally got my speaker pod flushed up, the solution.... ZIPTIES!! I used 4 of them and its perfect and way better then making a bracket and have to remove the head liner, I just need to cut te ZIPTIES if I ever need to change the speakers
and I mounted it more forway so it's not in anyone's face, now I need to finish off the sun visors and I'm done!!!
I have EF CRX shocks front and rear on lowering springs (Y)
Works well
Dan, i think you are confused. He's talking about hatch shocks.
Not sure of any other OEM that will fit, but if you have to order any I got these and love them. Pretty reasonable too. You might check out the website to see if there is any applications that are the same.
I have the wagon 2 eg's and a DA, the da is pretty clean and mint but I want to do a re paint, wagon needs a re paint, the 1 red eg needs a motor (the sohc from the wagon when I gsr swap the wagon) and the other eg is a bare shell
You will always have a project for sure! My eg has a gsr swap and a jackson schger and lots of other goodies and os fun to drive on track, autox and the street. Looking to get a bseries swap for the wagon so doing the research to see what all i will need to do and aquire in order to do the swap in the wagon. If you know of a good build thread with a list, send me the link.:encouragement:
Love the truck running lights on the wagon! Sweet!
i know my Build threads name is "Swagon" but i have officially changed the name of this lovely Honda, its now "The White Trash Wagon" lol
so today while working on my EG i noticed that the interior light bulb was one of those really bright zeon bulbs which was perfect because the map light i got from the DA and installed came with 2 of those and my stock interior light was just dull and didnt match, so i swapped that out,
also while working on my EG i wore an old work coat and found two red peanut bulbs in my pocket, so i switched out the amber peanut bulbs from the corner (in the blinker) to the DTRL up front in the corner so now the DTRL are amber (gives the amber corner look) and my blinkers are red, look kinda of cool, i tried to take a picture but you cant notice the color difference
no real updates yet, still waiting on my brother to bring our staple gun home from work to finish my sun visors and my shift knob to come in from prennro
saw you on instagram! I'm the kid with the blue wagon on white bbs. sick headliner and i love the speaker pod! im gonna take tat idea if you dont mind.
nice man! Thanks for the follow! Now you get to see my other 6 cars as their builds haha
go ahead man! just give me credit llol just make sure it goes in front of the "oh shit" handles in the rear closest to the front so it's in Noones way, and that it's wide enough to hang in the plastics (mines no and inch too short having moved it forward)
Comments
Not meaning to steal your idea or anything, but something SpiderMan themed
PM me and we'll sort something out !
- where it was mocked up was right above peoples heads in the back seat so there was no head room so i had to slide it forward
this caused the issue of where i ran the wiring which was 8" towards the back so the wires were exposed and looked crappy
-my suspension is really bouncy and where i live / my drive way are really bad so the car bounces like crazy all the time, the weight of the speakers + bouncing made the apoxy crack and split therefore making the speaker pod sag down in the middle and not sitting flush with the roof
So today i took the speaker pod out and re ran the wires more up front so now its not in anyones way and sits closer towards the driver
now i have to make up a support system that holds the speaker pod up to the head liner
NO is the answer, too long, does anyone know of any shocks that will work in replace of wagon ones?
then I finally got my speaker pod flushed up, the solution.... ZIPTIES!! I used 4 of them and its perfect and way better then making a bracket and have to remove the head liner, I just need to cut te ZIPTIES if I ever need to change the speakers
and I mounted it more forway so it's not in anyone's face, now I need to finish off the sun visors and I'm done!!!
Maybe EF shocks would work?
Works well
Dan, i think you are confused. He's talking about hatch shocks.
Not sure of any other OEM that will fit, but if you have to order any I got these and love them. Pretty reasonable too. You might check out the website to see if there is any applications that are the same.
CRX hatch struts wont work :P
Love the truck running lights on the wagon! Sweet!
i bought a GSR integra and pulled the full swap and was going to put it in this red hatch but its now going in the wagon
the previous owner did a full OBD1 conversion already to my wagon so its just drop the motor in and im good to go (figure of speech)
i already have the B series mounts, axles, tranny (YS1 , spare from my DA) header, wiring harness on the engine, Dizzy and ECU
they should match my wood grain wheel perfectly
old pic dont mind the stupid sticker in the middle
so today while working on my EG i noticed that the interior light bulb was one of those really bright zeon bulbs which was perfect because the map light i got from the DA and installed came with 2 of those and my stock interior light was just dull and didnt match, so i swapped that out,
also while working on my EG i wore an old work coat and found two red peanut bulbs in my pocket, so i switched out the amber peanut bulbs from the corner (in the blinker) to the DTRL up front in the corner so now the DTRL are amber (gives the amber corner look) and my blinkers are red, look kinda of cool, i tried to take a picture but you cant notice the color difference
And the wagon all lit up at night, the rear fog should be brighter but I think it has a weak ground
But I did wash it last night!
go ahead man! just give me credit llol just make sure it goes in front of the "oh shit" handles in the rear closest to the front so it's in Noones way, and that it's wide enough to hang in the plastics (mines no and inch too short having moved it forward)
i was going to get my sister to stitch them but I just stapled them instead
I put a nice hem on it then stapled as close to the edge as I could
and the finished product, the faces stay right side up both in the up and down position, just when they are down they don't line up