problem with wheels need help!!!!!

So i bought some drag dr20 15x7 +10mm offset wheels for my wagon. i am having problems fitting the wheels in. they pop out way to much on the front of the car what can i do to fit them. i have function and form type 1 coilover suspension and some ebay front camber kit which hits the top of the fender wall when i lower the car.please help!!!!

Comments

  • -4* + camber might take care of that
  • Get wheels that fit, if you want low offset wheels you will need to spend time fiddling with the height, camber and rolling the guards to make them work.

    You will probably need to get narrower tyres as well
  • FakeJDMEF8FakeJDMEF8 Senior Wagonist
    Yep, get wheelz that fit. Hellaflush doesn't work cause its not an actual application...
  • Get them ebay front camber arms off there. Had a friend go the cheap route and he took some hard corners and his adjustments slid maxing out his camber. They are just cheap and will work fine as long as you don't move the car. Went back in with much better bolts for the slides which fixed the problem but still not good. Skunk 2 UCAs won't hit the fender either!
  • Get a better camber kit. But stay away from Junk2.
  • What's wrong with Skunk2? Thought of buying some stuff off them too...
  • The balljoints will be done for in a year and from what I've seen they appear to be re-branded Chinese parts. They also put hits out on people who call out their shady business practices. Look it up if you're interested.
  • Haven't had any problems with mine. I have a set on the wagon and on the race car.

    I did have to replace the balljoints on the UCAs on my race car...after 6 years of service.
  • How long ago were those purchased though?
  • NZ-DB8RNZ-DB8R Moderator
    This thread was like three months old, it didnt need bumping up
Sign In or Register to comment.