4wd Hydraulic Transmission Swap

ThatDoodleThatDoodle Council Member
in Engine & Drivetrain
I have a 4wd hydraulic trans that i picked up from a jdm engine importing spot. I was wondering if anyone has any knowledge of what clutch and throwout bearing would be compatible with this trans.
Another question i have for you guys is... What hydraulic pedal assembly is compatible with our wagon chassis? 92-93 integra?
This trans is for a single cam.

11.jpg
12.jpg
13.jpg
14.jpg
15.jpg
16.jpg[/img]

Comments

  • turbo_tegturbo_teg Council Member
    unless your car is RHD good luck fitting a clutch master cylinder beetween your firewall and shock tower..... theres a few kits out there that let u use hydro trannies in cable cars im sure it would be easy to make it work....

    BTW what tranny u have?
  • ThatDoodleThatDoodle Council Member
    i dont have the numbers at hand right now but i'll get back with them later.
  • FSC4wdFSC4wd familEE
    Keep us posted.
  • SiWagonSiWagon Council Member
    Check the Hybrid sites.Isn't this hydro thing been done by peeps that put in Gsr trannies into EF's & CRX's.My guess is that it's the same Clutch & TO brg as the regular 4WD.
  • ThatDoodleThatDoodle Council Member
    i havnt forgot about the pics. Will post them tomorrow. thanks for the replies.
  • ThatDoodleThatDoodle Council Member
    i have the pics. My usb is missing right now. The trans code is
    S22-2005062
  • HaydzHaydz Moderator
    I think that is out of an EG5 RTi Sedan?
  • akiraboyakiraboy HondaCivicWagon.com Founder
    Pacifier wrote:
    I think that is out of an EG5 RTi Sedan?
    I thought all intrac & rt4wd wagons were cable clutch?
    in for pics
  • HaydzHaydz Moderator
    akiraboy wrote:
    Pacifier wrote:
    I think that is out of an EG5 RTi Sedan?
    I thought all intrac & rt4wd wagons were cable clutch?
    in for pics

    They are, but an EG5 RTi is a 92-95 Sedan. :P
  • ThatDoodleThatDoodle Council Member
    I searched and all is the same response as far as the hydro conversion is concerned. "Its a pain in the ass and not worth it" I guess i'll just try to utilize the hasport hydro kit i have for a b series on this. P, how did you find that info? Aren't the 92-95 Shuttles/ Beagles also hydro?
  • HaydzHaydz Moderator
    I know a few people who own EG5 RTi's over here in NZ. They use an S series transmission. The Shuttles and Beagles i can't confirm but i am pretty sure the Shuttles kept using the L3, but i have no solid evidence of that.

    As far as the hydro conversion goes i think you'd need a pedalbox, slave cylinder and linkages, not sure what else.
  • ThatDoodleThatDoodle Council Member
    I guess I'll just have to use trial and error for this one. Im going to do this when i get a dohc zc.
  • HaydzHaydz Moderator
    If you're super keen, try and get the OBD1 DOHC ZC because that's the motor some of them came with. ;)
  • ThatDoodleThatDoodle Council Member
    Yes I will definately be smart about it. Im sure the 0bd1 would have less miles also. I just took my a/c compressor off one the other day. Im about to go check the compression on it and have my dude do a leak down test. He said I can get it for 500usd with all the paperwork.
  • BIOHAZARDBIOHAZARD Wagonist
    HASport made a lever system that activates the EG 2wd hydro tranny with the stock clutch cable, im not sure if it will work on a D-series 4wd tranny though. you could call them and ask some questions about it...

    heres the link to the lever setup - http://hasport.com/shop/product_info.ph ... cts_id=171
  • ThatDoodleThatDoodle Council Member
    yea i bought that kit last november. Theres a lot of modding to do to get it to work. I already got started on making the bracketry to work. only thing left to do is the get the rear trans bracket to line up to the RTSi mounting holes.
  • HaydzHaydz Moderator
    An EG mount plate might need to be mated to the EF mount.
  • ThatDoodleThatDoodle Council Member
    Haydz wrote:
    An EG mount plate might need to be mated to the EF mount.

    Its weird though. The eg's have a rear "T" bracket lke the b series and the ef's have the top mount plate with a bracket that mounts to it
  • HaydzHaydz Moderator
    Yeah sorry - other way around. I was thinking of my conversion. :lol:
  • akiraboyakiraboy HondaCivicWagon.com Founder
    in for updates
  • ThatDoodleThatDoodle Council Member
    Im going to update soon. My reverse finally took a dump 2 days ago. My only worry with this is the throwout bearing. I have to measure it and see if its the same as the wagon. Pics coming soon.
Sign In or Register to comment.

© Vanilla Keystone Theme 2025