My new project the rt4wd CRX

135

Comments

  • adamEFwagonadamEFwagon Senior Wagonist
    NJCIVICWAGON1 wrote:
    turbo_teg wrote:
    BTW the 5 lug is pimp!
    Thanks....I will post pics when its done...
    that crx is looking good man. NJ you got type-r 5 lug on your wagon?
  • NJCIVICWAGON1NJCIVICWAGON1 Council Member
    adamEFwagon wrote:
    NJCIVICWAGON1 wrote:
    turbo_teg wrote:
    BTW the 5 lug is pimp!
    Thanks....I will post pics when its done...
    that crx is looking good man. NJ you got type-r 5 lug on your wagon?

    Thats a negative. I was going to finish install the 5 lug this weekend but I dropped my tranny instead to change a leaky main seal. Hopefully this week coming it will be done. Stay tuned for pics.....Sorry Teg I dont mean to jack this thread.....
  • turbo_tegturbo_teg Council Member
    you can jack me all day.... wait did that sound gay? haha its cool.
  • nominousnominous familEE
    Did you run it up with just the rear axles in the end ?
  • adamEFwagonadamEFwagon Senior Wagonist
    turbo_teg wrote:
    you can jack me all day.... wait did that sound gay? haha its cool.
    haha
  • turbo_tegturbo_teg Council Member
    nominous wrote:
    Did you run it up with just the rear axles in the end ?

    huh?
  • nominousnominous familEE
    turbo_teg wrote:
    nominous wrote:
    Did you run it up with just the rear axles in the end ?

    huh?

    Referring to:
    turbo_teg wrote:
    can u see anything strange in this photo?................. its only got an axle end in it so when she fires up for the first time i can do some RWD testing AKA cookies, burnouts, and maybe a drift or two.

    Interested in how that would work. :D
  • turbo_tegturbo_teg Council Member
    u need axle ends in so u dont chew up your front wheel bearings. think about it.....
  • turbo_tegturbo_teg Council Member
    did some things today

    shifter.jpg

    turboshot.jpg

    fulerail.jpg

    rearend.jpg

    rearend2.jpg

    and for shits and giggles heres mikes project big block luv

    bigblockluv.jpg

    luvrearend.jpg

    the big block is kinda just sitting in there hes pulling it and putting just a SB in.
  • nominousnominous familEE
    turbo_teg wrote:
    u need axle ends in so u dont chew up your front wheel bearings. think about it.....

    eh ?
    You need axles ends in the tranny so the oil doesn't leak out, but if you are running RWD they just act to block up the holes in the tranny.

    Front wheel bearings don't exert load on the axle splines, you can run without axles at all if you have some other means of propelling the car.

    You said you'd put axle ends in the tranny so you could try out RWD only. Did you try that yet or do you not plan to any more ?
  • turbo_tegturbo_teg Council Member
    yes i have the half shaft and the pas side inner axle inside the tranny so it doesnt leak its fluid all over so that for the first test run i can do some RWD burnouts.
  • wagodizzlewagodizzle Council Member and EDM expert
    you better make a video of that and post up here d00d 8)
  • Dead_BunnyDead_Bunny Wagonist
    you should put a little sticker that says AWD on the back (really small, so people will only see it once you pass them ^.^
  • turbo_tegturbo_teg Council Member
    haha they dont need to know at all.
  • ThatDoodleThatDoodle Council Member
    Dead_Bunny wrote:
    you should put a little sticker that says AWD on the back (really small, so people will only see it once you pass them ^.^

    Or a Rt4wd decal on the side moldings the same way our Rt's have it on the rear doors
  • wabashkywabashky New Wagonist
    and teh 4wd mud flaps
  • freddogg509freddogg509 New Wagonist
    people he doesnt want ne 1 to know itz 4wd :twisted: 8)
  • turbo_tegturbo_teg Council Member
    thanx freddy
  • wabashkywabashky New Wagonist
    i was just thinking along the lines of a subtle give-away that most wouldnt get until it was too late...thats all. :)
  • turbo_tegturbo_teg Council Member
    i know what u mean but shes staying stealth. besides its not going to be super insane fast im building it for autocross. my wagon is gunna be boosted again hopefully by spring time with a z6, vittara pistons, and a way bigger turbo than before and it will be my big hp street machine.
  • Dead_BunnyDead_Bunny Wagonist
    haha once you do beat them in the AWD stealth

    you can give them this look right here
    105.jpg


    btw, you gotta do a thread for the next project wagon
  • turbo_tegturbo_teg Council Member
    of course im all about sharing projects and ideas with y'all im no punk that keeps my stuff under raps besides im terrible and keeping a secret for too long.
  • evol911evol911 familEE
    bump to light a fire under tegs ass
  • turbo_tegturbo_teg Council Member
    haha i know im slanging anything i can to help pay for the project im gunna pull it back into the shop soon i swear.
  • turbo_tegturbo_teg Council Member
    got the radiator from jaker this weekend and orderd a fan for it tonight. on friday im gunna order most of my fuel lines and my fuel pump.
  • evol911evol911 familEE
    Now thats what I'm talking about!! I wanna see some all-wheel smoke :twisted:
  • wagodizzlewagodizzle Council Member and EDM expert
    sweetness! back on the band-wagon 8)
  • HaydzHaydz Moderator
    I think that pun should be banned from this forum. :P
  • turbo_tegturbo_teg Council Member
    Well the fuel lines and pump are on there way! i need a 90* coupler and to drop my driveline off to get made into the right lenght. Talked to mike tonight and were gunna wait till i get all my parts and tear into so by next weekend i should be jammin on it hard core!
  • 91' ls-vtec91' ls-vtec New Wagonist
    finish that car already. I just want to brag to people that I have a freind that owes a AWD-Turbo-CRX!
Sign In or Register to comment.

© Vanilla Keystone Theme 2025