haha no i havent rammed anything yet. its not exactly bolted on "quite right" yet. err, that is, it lifts up. you can push down all day without movement but it will pull up. yeah, well actually its not doing anything right now haha i took it off to do the MPFI. its kinda in the way of anything mechanical. anywho... its all in the works :roll:
my dad and i had a little photoshoot last night around 1 am, i guess we were bored and he was playing around on his camera with some new tricks he learned.. anyways, i hope you guys enjoy 8)
I tried looking for a bullbar similiar to yours but couldn't find one. Do you have any more specific info as to what model/year it came off of? Don't wanna copy, but I want a bullbar and I don't own a pipe bender, so it'd cost a bit of dough to have somebody else make one that isn't exactly how I'd want it. The cow test is an awesome idea :idea: :twisted: :idea:
Nice pants, I rocked the plad (sp?) for a couple years now, but I think I'm going to start another fashion faze soon.
bullbar: it came off a 1998-2002 Kia Sportage SUV that was converted to one of those rolling Red Bull ads. cost me $25 and just needed minimal fabrication
im thinking about selling my Spuns and getting Sportmax 002s in red. 15x7 38mm offset for the front and 15x8 0 offset for the rear.. input??
i've been in love with them ever since i first laid eyes on these pretties.
do it. I wanna see how that looks!! I almost did that the other day when I picked up mine from JLB. I may just have to pick two of them up 15x8. if it don't work, I've got four the same.
Won't the rears be just barely tucked with severe camber and the front still have an inch to the edge of the fender? Wouldn't it look better with a lower offset on the front or a higher offset on the rear? I'm just concerned it won't be equal.
there would only be an inch difference front and rear. i like wider rear wheels and the front not so wide cause i know for a fact they would rub like crazy in corners. um, my camber is set pretty good right now
Yeah, I just thought it might be a little better if you went with a offset of 10 in the rear and 30 in the front as it would probably match a little better (I don't know what offsets are available, I looked on their website and all I found was rim and lip size). I can imagine it would rub though. My hatch rubbed the plastic fenderliner on full crank with 195/60r14 on hx rims and lowered 2 ish inches. Not the top of the fenderliner though, about where the frame is on the vertical part of the liner.
Rag, are any of those pictures with the suspension compressed with negative camber? If you stretch the tires like the vdub guys, then it could probably work.
yeah my 195/50/15 tires rub in the front on quick turns lowered about 2.5 inches. my rear is not slammed though, i have about 2.5 inches of wheel well space. i like how the wheels stick out in the rear though :roll:
Comments
BTW, can't you remove that piece and just pop it out? I assume you're talking about that piece under the tail light...ORRRRRR.....
...you could just slap a sticker on it and call it a day!
i tried popping it out before BUT i dint wanna crinkle the metal or paint. haha stickers stay on glass, thats a strict policy of mine :roll:
What's that on the bullbar then?
Just givin you a hard time bub...
just yankin' yer chainnnnn
have you and Rage been conspiring against me? I KNEW IT.
BAN YOU ALL!!!
these are just a few of the 50 or so photos hehe
Are you going to be a car model now?
well, there arent any girls here to model for me so i have to do it myself hahahaha
LMAO @ the moment
Nice pants, I rocked the plad (sp?) for a couple years now, but I think I'm going to start another fashion faze soon.
bullbar: it came off a 1998-2002 Kia Sportage SUV that was converted to one of those rolling Red Bull ads. cost me $25 and just needed minimal fabrication
i've been in love with them ever since i first laid eyes on these pretties.
do it. I wanna see how that looks!! I almost did that the other day when I picked up mine from JLB. I may just have to pick two of them up 15x8. if it don't work, I've got four the same.
heres a picture with 15x7 fronts and 15x8 rears.
except i want the 002s.
Those are sportmax 0 offsets.
Rag, are any of those pictures with the suspension compressed with negative camber? If you stretch the tires like the vdub guys, then it could probably work.