im_so_dumped _ they ride pretty well one member said they didnt lower his car but mine is slammed it could go a tiny bit lower in the back like maybe one coil off i also have top hats and thats it top hats i made but that doesnt make the car lower its just for a lil more comfort... you just need 92-95 front forks and keep your lca hardware cause the hardware it comes with doesnt not fit
503wagon _ cool. thanks and yeah it does suck but oh well.
Hey Josh,
did you have to cut any coils of the springs to make the Rokkor lower? Beside the EG forks, are they pretty much plug and play? So extended top hats are not required, correct? Why did a few members here say they couldn't go lower on the Rokkor or Racelands?
Can you also give us a detailed review on how you like the the Rokkors...thinking bout getting a set myself in a week or so.
think the armrest came out of an EG i also have another one but its going into my rabbit. its all black with black suede and even has a cup holder thats can come out. @jdmwago666 thanks!
wagon is looking sweet! iv seen those wheels on a few other cars but they never quite have the right fitment to pull them off, yours is just right. cargo cover is sweet aswell but i think my favourite thing about this build is the custom shift knob. If you ever make a few ill buy one for sure , exactly what im looking for... not that my wagon is running
OK so I have been meaning to post these pictures for a long ASS time now but I internet sucked so I got a new provider and now posting pictures on the internet isnt such a hassle. WELL about 6 months ago the wagon broke down and I couldnt figure it out because it wanted to start so bad and it wasnt trying to let me down I could tell. After trouble shooting it like 30 times I decided to pull the head it dropped a valve put a hole in the piston. So I got online and decided to order a JDM DOHC ZC. A week later the motor came in and week later I put it in. I bought some innovative mounts from fakejdm and found out that one of the mounts was welded backwards. I tried and tried and tried to put that mount in but it just wouldnt happen. So I left one stock mount. Wasnt fakejdms fault he didnt know but he is a great seller. A WEEK after putting in the motor(Which by the way runs very very strong and makes me proud.) I was on my way to Albuquerque NM for small meet/dyno day. 10 minutes out of ALB I ram my tranny on the freeway!!! It hit so hard the rear bracket ripped out slapped my started and put a hole in the bottom end of the tranny. So my friends and I pulled over we checked out the damage then pushed started the car. I drove to the dyno meet and stayed the night. I rigged up a drip line through the speedo which worked until have way back home.. after that I ordered a jdm awd zc tranny from h motors online. So I then talked to innovative and those guys being good people sent me a brand new mount. For free. A week later everything is in and run great and transmission is awesome being that mine grinded second gear at high rpm from previous owner!.
ok ill start with the motor that came in
GOODBYE A6! it was fun
cleaned up the bay a lil
thought this was cool. came with motor. along with ngk spark plug wires
ready to go in
POW sorry for cell phone pics didnt have my camera most of the time!!!
on the way to ALB w my girl with a few buddies also
the damage from the bracket slapping my starter
buddies del sol and boosted crv
my others buddies made it red teg and prelude. a few others but pics not posted
the bird goes with me everywhere for about a year now
some pics of my car from dyno day. you can my car bleeding in this one
a week affter dyno day
taking the motor back out
motor out
new tranny!!
jdm da armrest i rewrapped
underneat my cargo cover(i really need some hatch struts)
my teg with enkeis on it
i heard about what happend to your wagon i was gona go to the motiva meet myself but i didn't finish my wagon in time :disturbed:... i live in santa fe where are you located at??
in Roswell man. yeah i was pretty bummed the F out. but im riding a WHOLE lot better! Ill be in ABQ in june or july i heard there was another meet. also i might just be moving up there too well to Rio Rancho.
Sorry about the mounts again, but I'm glad they warrantied it for you. Good to hear Innovative doing the right thing.
I'd love to roll with you and see how that zc does compared to my mini me. Not sure if I wanna rebuild the mini me or get a dohc zc or turbo sohc zc or what. Haha.
Wagon is looking great! Come hang in Abq sometime soon!
That's cool yea ill be taking my wag to the next meet for shur I'm glad everithing worked good man. I do but I don't know how to upload them and I got the internet shut down yesturday lol you should move therapists more action on burke more stuff to do...
Comments
Hey Josh,
did you have to cut any coils of the springs to make the Rokkor lower? Beside the EG forks, are they pretty much plug and play? So extended top hats are not required, correct? Why did a few members here say they couldn't go lower on the Rokkor or Racelands?
Can you also give us a detailed review on how you like the the Rokkors...thinking bout getting a set myself in a week or so.
Thanks for any help!
and lil more cargo cover action with the bird who is always chillin,.. and the FINGER
and arm rest will be put in some way some how
Car looks good
ok ill start with the motor that came in
GOODBYE A6! it was fun
cleaned up the bay a lil
thought this was cool. came with motor. along with ngk spark plug wires
ready to go in
POW sorry for cell phone pics didnt have my camera most of the time!!!
on the way to ALB w my girl with a few buddies also
the damage from the bracket slapping my starter
buddies del sol and boosted crv
my others buddies made it red teg and prelude. a few others but pics not posted
the bird goes with me everywhere for about a year now
some pics of my car from dyno day. you can my car bleeding in this one
a week affter dyno day
taking the motor back out
motor out
new tranny!!
jdm da armrest i rewrapped
underneat my cargo cover(i really need some hatch struts)
my teg with enkeis on it
Sorry about the mounts again, but I'm glad they warrantied it for you. Good to hear Innovative doing the right thing.
I'd love to roll with you and see how that zc does compared to my mini me. Not sure if I wanna rebuild the mini me or get a dohc zc or turbo sohc zc or what. Haha.
Wagon is looking great! Come hang in Abq sometime soon!
@maxfromCO Thanks bro!
make sure to get brace because sucks fabbing one up... i wasnt lucky so i made my own
Just for fun i taped these old school chevy hubcaps to my wheels i think they look cool!
just washed up!
I had another picture but it didn't want to upload
Good Work..
And, those old Chevy Hub Caps looks great!