Oh man you dont have to do that, I was just wondering because my girlfriend thinks you have to be 21. And we are both 20.
yeh i think you do have to be 21 but luckily for you im 24, i can get the room for you and yall can just pay me back, i trust you not to trash the place.
That would be awesome! And no, we;re super chill. I would probably end up making the bed. haha
ill help you guys out, but you have to promise me you wont make your own bed haha. figure out where you wanna stay and what nights and send me a facebook message and ill get it all sorted out.
Will do, I really appreciate it. This is why I love the Wagon community. So willing to help eachother out. I just need to get a solid yes from my manager. I will see about that tomorrow and let you know.
Will do, I really appreciate it. This is why I love the Wagon community. So willing to help eachother out. I just need to get a solid yes from my manager. I will see about that tomorrow and let you know.
Is it possible to go lower!? And I see the muffler you got. Looks pretty sweet! Cant wait to hear it too.
Its gonna be hard but I want it so I'm going to do it, and the new exhaust is thanks to the great state of north carolina, I love this place because of the scenery and the rich history but I hate the way things in this state are headed. But that's a rant for another day, anyways my tag got revoked and I got stopped and it was taken for what the DMV said was basically a clerical error but to get my tag back I have to get my car inspected and pay for a new one, and the only shop in town that has a slammed car friendly lift is also run by some mustang enthusiasts. They failed my car because of the exhaust so I'm building a 2.5 inch exhaust with high flow cat and race muffler
Thats messed up man. At least it gives you motive to get it done though. I need to get a hole welded in my exhaust bcause the weld they did has a leak. Do you guys have state inspections like us Virginians do?
Thats messed up man. At least it gives you motive to get it done though. I need to get a hole welded in my exhaust bcause the weld they did has a leak. Do you guys have state inspections like us Virginians do?
Yeh we do but I think ours are supposed to be easier, for our cars wince they are so old they only have to pass a safety inspection which makes sure you have all your lights and a horn and make sure you have a catalytic converter and muffler
in the downtime i have waiting on parts for the wagon to come in i started replacing the headgasket on my sisters forenza. I was expecting a simple honda like job because they are both small FWD 4 cylinder engines. i was wrong.
Ooooooooohhhhhhhh, nice! I'm really liking the yellow high beams. Are they any better to see with?
What brand Cat is that? I have a Magnaflow on my Wagon.
15 different sizes of torx head bolts and screws, some requiring female sockets and some required male sockets, and the motor mounts are attached to the head instead of the block, and instead of using 1 or 2 sizes of metric bolts Suzuki used everything from a 10mm-19mm just to remove the head.
Ooooooooohhhhhhhh, nice! I'm really liking the yellow high beams. Are they any better to see with?
What brand Cat is that? I have a Magnaflow on my Wagon.
Its just a cheap eBay one, thunder racing is the brand on it but it's basically a 12 inch expansion chamber with some mesh welded I great for lots of noise but not so good for the environment.
and no the yellow high beams arent any better to see with but they were 10 dollars and they give it that classic jdm yellow headlight look. that whole sentence made me sound like a ricer, but i dont care.
Well some more goodies came in a couple days ago and the wagon got 2 days of love, hid's, front camber kit, and a full mandrel bent 2.5 inch exhaust with brand new headers, new high flow cat, a new race muffler, and the perfect finishing touch..... a black with white stars bosozoku style tip
well here it is a couple days before the meet and im driving down the interstate and i go to downshift and once my car is in neutral it wont go back into gear, so fuck.... my clutch just broke..... i limp it home with some nifty rev matching and we get the transmission dropped and pull the clutch and the clutch is beautiful... it ended up being the throw-out bearing spring that has broken. so we salvaged a little spring off of a trans and went ahead and replaced the clutch so there should be no hiccups. While we were at it we did a little bit more exhaust tucking and i drove it 100 miles on the roughest roads around with no bottoming out. This means its time to go lower, MrM3 claims his wagon is 25 inches from the door handles to the ground and im just below 26 inches right now. So i guess i am officially calling him out, im coming for his 25 inches.... and i'm daily driven.
Comments
yeh i think you do have to be 21 but luckily for you im 24, i can get the room for you and yall can just pay me back, i trust you not to trash the place.
ill help you guys out, but you have to promise me you wont make your own bed haha. figure out where you wanna stay and what nights and send me a facebook message and ill get it all sorted out.
no worries haha, wagon love
Its gonna be hard but I want it so I'm going to do it, and the new exhaust is thanks to the great state of north carolina, I love this place because of the scenery and the rich history but I hate the way things in this state are headed. But that's a rant for another day, anyways my tag got revoked and I got stopped and it was taken for what the DMV said was basically a clerical error but to get my tag back I have to get my car inspected and pay for a new one, and the only shop in town that has a slammed car friendly lift is also run by some mustang enthusiasts. They failed my car because of the exhaust so I'm building a 2.5 inch exhaust with high flow cat and race muffler
Yeh we do but I think ours are supposed to be easier, for our cars wince they are so old they only have to pass a safety inspection which makes sure you have all your lights and a horn and make sure you have a catalytic converter and muffler
high flow cat
and my yellow high beam bulbs came in today also
What brand Cat is that? I have a Magnaflow on my Wagon.
15 different sizes of torx head bolts and screws, some requiring female sockets and some required male sockets, and the motor mounts are attached to the head instead of the block, and instead of using 1 or 2 sizes of metric bolts Suzuki used everything from a 10mm-19mm just to remove the head.
Mrm3s wagon is 25 inches from the ground to the bottom of the door handle and I want to be lower than that
I got a new sticker to cover up my lasagna fender
Then I took my baby shopping
Then my dirty girl needed a bath
Its a DOHC ZC