nothing much done with it just added a bonnet bra (borrowed) im looking to buy one. hit me up if anyone is selling one. can swap it with rare personal non-smoking tray and rear fogs.
my mate told me that too!. lol. i havent seen it tho. turbo is already in. its from Chris aka Rti Intrac's another turbo shuttle. Planning to do the proper internals this year. just so busy at work so i couldnt have time.
i used to have 15x8 0 offset 195/50/15 tyres. rears are okay with -2.5 deg camber with just rolling the rear fenders. the fronts are -3deg camber and needs to pull the guards but i didnt do a good pulling so i effed it uped.
atm im with 16x8 +20 offset with 195/45/16 tyres. rears are good and i even managed to lower it about 15mm lower (front & rear) without any rubbing. i changed my front guards with standard guards (just rolling the edges of the guards) without any rubbing too. hope that helped.
So the last set of pics, you are using 16x8 ET20? The fronts are poking a bit too much for our police unfortunately. I think I will go with same fitment in the back, and maybe 0.5 inch narrower wheels than in the back. Should be perfect, have to test.
Thank you so much! Your Beagle is really nice! Jealous of the bull bar and the foglights :P
Went recently to 4andRotary show and managed to squeeze the Shuttle Beagle just on time for Show and Shine. It has been few years that I haven't really done anything with the beagle, with a few peer pressure, up my ass and worked on it again.
Repainted the bonnet, front & left front guards, front bumper and new lip
bought a new set of 16x8 wheels
and a goooood buff and polish.
Sadly, i'm selling it so i could move on with my other car 'build'.
but! before i sell it, i had to make a nice memory with it so a good mate of mine made me a rad video of it.
Nice! Good to see you still have it. Is it still my old turbo kit on it?
Edit: what front lip do you have. It looks good
yeah been selling it on Facebook pages but all i get is likes likes likes. lol
bought the lip from Speedscience. link is there. it actually looooks nice. fitment is nice too.
yes I still have the turbo kit. but somehow its not holding boost so suspect is got a boost leak somewhere. will do a smoke test when im not too busy at work.
Comments
nothing much done with it just added a bonnet bra (borrowed) im looking to buy one. hit me up if anyone is selling one. can swap it with rare personal non-smoking tray and rear fogs.
Thanks for sorting the wof for me
i use pacer.
i replaced my 2 front fenders c/o geoff (siRge) cos i effed them up when i chucked the 15x8 - 0 offset wheels
bit bored with my intercooler so i painted it. first time to paint so excuse for quality.
just for the lols.
hopefully to get my front 2 fenders/guards a repaint this week or just leave it for a while and just do a cut&polish.
and just wanna share a small video clips made by our crew http://www.facebook.com/filnation?fref=ts enjoy
http://www.youtube.com/watch?v=SIy6Q-428fQ
http://www.youtube.com/watch?v=Z3H8f0_J2R8
Feck I cant wait to have my shuttle lowered, yours is looking great, very jealous!
thanks bro. the rears needs a bit of spacers proly 15mm i tried 25mm and its hellafail and rubs so hard.
your shuttle beagle is sick too. very clean and tidy!
your fitment is perfect
Thank you so much! Your Beagle is really nice! Jealous of the bull bar and the foglights :P
Went recently to 4andRotary show and managed to squeeze the Shuttle Beagle just on time for Show and Shine. It has been few years that I haven't really done anything with the beagle, with a few peer pressure, up my ass and worked on it again.
Repainted the bonnet, front & left front guards, front bumper and new lip
bought a new set of 16x8 wheels
and a goooood buff and polish.
Sadly, i'm selling it so i could move on with my other car 'build'.
but! before i sell it, i had to make a nice memory with it so a good mate of mine made me a rad video of it.
make sure you click on HD! enjoy!
Edit: what front lip do you have. It looks good
yeah been selling it on Facebook pages but all i get is likes likes likes. lol
bought the lip from Speedscience. link is there. it actually looooks nice. fitment is nice too.
yes I still have the turbo kit. but somehow its not holding boost so suspect is got a boost leak somewhere. will do a smoke test when im not too busy at work.
Cool I'll have a look when my prefacelift bumper turns up
I wonder if its my rangi discharge pipe off the turbo?