EF9 air box will it fit?

Just curious if the jdm ef9 air box and filter configuration has been done or atteppted in a wagon, I have a line on one and would like to confirm befor jumping on it.

Comments

  • NZ-DB8RNZ-DB8R Moderator
    Yep, I have one in mine.
    You have to use EF9 Intake arm as well as it is a larger diameter. Also the mounting brackets dont line up so mine tends to just sit there, cant go anywhere though.

    Pic:
    436.jpg
  • Mr GMr G Wagonist
    Sweet thank you sir.

    This air box does not have the tube though, I was thinking that the DA integra one would work.

    Any incite on that?
  • NZ-DB8RNZ-DB8R Moderator
    Not sure sorry, I have never owned a DA. But its likely you could make it work, even if you had to trim is slightly to fit
  • Mr GMr G Wagonist
    Ok ok, one more question, what filter do you guys use. Did or does k&n make one. If so does any one have the part number. I have no listing in Can for an EF9

    Luckily this one has a good filter, well for a little bit.
  • NZ-DB8RNZ-DB8R Moderator
    I have a K&N filter conveniently, I will see if I can find the box and let you know the part number, should be universal worldwide
  • Mr GMr G Wagonist
    Sweet thank you, were a kn distributor but have no listing for the EF9 civic and when you ask the rep they have no clue what you're talking about. So a part number would be awesome.
  • NZ-DB8RNZ-DB8R Moderator
    Still havnt dug the box out sorry, will try do it after work tomorrow
  • Mr GMr G Wagonist
    No problem, whenever you find it or have the time no rush.

    I did pick the air box up, but I am not using it until the b swap is in. Ill keep checking in.
  • NZ-DB8RNZ-DB8R Moderator
    The filter you need is a 33-2061
    http://www.knfilters.com/search/product ... od=33-2061

    I had thrown the box out so pulled the filter out today to check for you
  • Mr GMr G Wagonist
    Thank you sir, I'll check at work if that number works in the Canadian k&n system.
Sign In or Register to comment.