Electrical harness from a D16A6

A_CrxRiderA_CrxRider Band Wagon
in Engine & Drivetrain
Hey guys,
I was able to get a crash/damage car where I could take parts out for my wagon. Since my engine was giving me some problems already, I decided to switch the engine. I'm taking my old regular stock engine and putting the D16a6 engine. Now I have all the parts but I'm confused about the whole harness.
I'm taking all the parts from a crx si car I just got, so I have the mpfi manifold, ecu, resistor box, engine harness, pretty much all the required parts to put on my wagon.
So..
Can I just take off the electrical harness from my wagon and replace it with the harness the new engine came off?
If I have to use the electrical harness from my wagon, will I have to do any changes?

I'll be putting some pics of my progress.
Thanks all!

Comments

  • danzdanz Wagonist
    a d16a6 harness will not plug into your d15b2 harness.

    the easiest way to do this swap is to do a mpfi conversion to your stock harness. it involved running 4 new wires. its really not hard to do at all.


    you will find many many places where the plugs on the A6 harness differ from the B2 harness.
  • A_CrxRiderA_CrxRider Band Wagon
    Thanks danz!
    I'm already looking at some sites on how to do the mpfi conversion. It's really not that hard when you have the right information.
  • DarinDarin Wagonist
    the only hard part is de pinning the wires.lol
  • danzdanz Wagonist
    Darin wrote:
    the only hard part is de pinning the wires.lol
    yeah it doesnt help when were drunk too. lol




    i really like this how to. i just follow it paragraph by paragraph and do what it says, as it says, and it always works!


    http://hondacrx881.tripod.com/mpfiswap.html
Sign In or Register to comment.

© Vanilla Keystone Theme 2025