Manual Shifter linkage

DDCWAGONDDCWAGON Banned
in Engine & Drivetrain
I have a 90 2wd wagon and also a 91 ef with a zc / 5sp. swap. Both cars were originally AT. I am thinking about swaping my zc /5sp. into my wagon and I was wondering if the shift linkage, pedal cluster and shifter will bolt up?

Comments

  • quartersquarters Council Member
    everything should bolt up. the pedal cluster from a civic/crx is slightly different than the wagon one and sits at a different height. I had a CRX one in my wagon and didn't quite like the feel, sat to low or something. I put a wagon one back in. reason i changed it in the first place was a crack in the steel that was flexing when i tried to clutch... that's another story all together.
  • DDCWAGONDDCWAGON Banned
    Thanks for the info! I have seen others on the forum disscussing shifter linkage mods would I have tom lengthen the shift rod since the tunnel is higher in the floorpan like the pedals,seats,ect?
  • KahunaKahuna familEE
    When I did my B16 auto to manual, I didn't notice anything different from a Civic/CRX except the shifter seems to be over to the right some for some reason..

    Also, I didn't notice any difference in my pedals either..

    NOTE:
    Throttle cables are different between auto and manual.
    I didn't know that and I had to zippy-tie my cable onto my pedal until I could get a new one.
Sign In or Register to comment.

© Vanilla Keystone Theme 2025